No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwEntDspAttributeTable

hwEntDspAttributeTable

This table is used to configure and query DSP attribute parameters.

This table does not have any indexes.

OID

Object Name

Data Type

Description

Maximum Access Permission

Status

1.3.6.1.4.1.2011.5.25.253.5.1

hwEntDspFaxMaxTrainRate

INTEGER

This object indicates the maximum transmission rate in fax training mode.

The options are as follows:

  • 1: v17
  • 2: v29
  • 3: v27

Default value: v17

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.2

hwEntDspFaxTrainMode

INTEGER

This object indicates the fax training mode.

The options are as follows:

  • 1: e2e
  • 2: localTrain

Default value: e2e

NOTE:

The fax training is classified into remote training and local training. The local training involves only a PSTN network and the remote training can involve a PSTN or IP network.

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.3

hwEntDspCodeType

INTEGER

This object indicates the default code type of the DSP channel (unavailable for the SIP).

The options are as follows:

  • 1: g711a
  • 2: g711u
  • 3: g723
  • 4: g729
  • 5: g726by16k
  • 6: g726by24k
  • 7: g726by32k
  • 8: g726by40k

Default value: g711a

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.4

hwEntDspRtcpPackageSendInterval

Integer32

This object indicates the interval of sending RTCP packets through the DSP channel.

Value range: 0 to 65535

Default value: 5000

The unit is millisecond. Only values that are greater than or equal to 500 are valid. The value 0 indicates that the function disabled.

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.5

hwEntDspRtpPacketInterval

INTEGER

This object indicates the default interval of sending RTP packets through the DSP channel (unavailable for the SIP).

The options are as follows:

  • 1: interval5ms
  • 2: interval10ms
  • 3: interval20ms
  • 4: interval30ms

Default value: interval20ms

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.6

hwEntDspEchoCheck

INTEGER

This object indicates whether to enable the echo suppression function for the DSP channel (unavailable for the SIP).

The options are as follows:

  • 1: enable
  • 2: disable

Default value: enable

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.7

hwEntDspSilenceReduce

INTEGER

This object indicates whether to enable the silence compression function for the DSP channel (unavailable for the SIP).

The options are as follows:

  • 1: enable
  • 2: disable

Default value: disable

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.8

hwEntDspClearmodePayload

Integer32

This object indicates the RTP payload type value of the DSP channel.

Value range: 96 to 127

Default value: 100

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.9

hwEntDspSevereDegradethreshold

Integer32

This object indicates the threshold (duration) of severe packet loss.

Value range: 1 to 65535

Default value: 400

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.10

hwEntDspBvqm

INTEGER

This object indicates whether to enable the voice quality monitor (VQM).

The options are as follows:

  • 1: enable
  • 2: disable

Default value: disable

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.11

hwEntDspPlc

INTEGER

This object indicates whether to enable the packet loss compensation algorithm.

The options are as follows:

  • 1: enable
  • 2: disable

Default value: disable

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.12

hwEntDspMinAdaptJitterBuffer

Integer32

This object indicates the minimum dynamic jitter buffer of the DSP.

Value range: 0 to 150

Default value: 2

Unit: millisecond

Min ≤ Init ≤ Max and Min < ThresholdJitterBuffer

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.13

hwEntDspMaxAdaptJitterBuffer

Integer32

This object indicates the maximum dynamic jitter buffer of the DSP.

Value range: 0 to 150

Default value: 135

Unit: millisecond

Min ≤ Init ≤ Max and Min < ThresholdJitterBuffer

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.14

hwEntDspInitAdaptJitterBuffer

Integer32

This object indicates the initial dynamic jitter buffer of the DSP.

Value range: 0 to 150

Default value: 2

Unit: millisecond

Min ≤ Init ≤ Max and Min < ThresholdJitterBuffer

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.15

hwEntDspMinFixedJitterBuffer

Integer32

This object indicates the minimum static jitter buffer of the DSP.

Value range: 0 to 150

Default value: 2

Unit: millisecond

Min ≤ Normal ≤ Max

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.16

hwEntDspMaxFixedJitterBuffer

Integer32

This object indicates the maximum static jitter buffer of the DSP.

Value range: 0 to 150

Default value: 135

Unit: millisecond

Min ≤ Normal ≤ Max

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.17

hwEntDspNormalFixedJitterBuffer

Integer32

This object indicates the initial static jitter buffer of the DSP.

Value range: 0 to 150

Default value: 60

Unit: millisecond

Min ≤ Normal ≤ Max

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.18

hwEntDspRedundancyPayload

Integer32

This object indicates the Redundancy payload type value of the DSP channel.

Value range: 96 to 127

Default value: 96

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.19

hwEntDspRedundancyT30

Integer32

This object indicates the T.30 redundancy parameters for the T.38 fax.

Value range: 0 to 7

Default value: 3

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.20

hwEntDspRedundancyT4

Integer32

This object indicates the T.4 redundancy parameters for the T.38 fax.

Value range: 0 to 3

Default value: 3

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.21

hwEntDspFaxV8Negotiate

INTEGER

This object indicates whether to enable the V8 negotiation for T.38 fax.

The options are as follows:

  • 1: enable
  • 2: disable

Default value: disable

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.22

hwEntDspRTCPXR

INTEGER

This object indicates whether to enable the extended report for the Real-Time Transmission Control Protocol (RTCP).

The options are as follows:

  • 1: enable
  • 2: disable

Default value: enable

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.23

hwEntDspVbdPayload

Integer32

This object indicates the VBD payload type value of the DSP channel.

Value range: 96 to 127

Default value: 102

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.24

hwEntDspRfcNtePayload

Integer32

This object indicates the NTE payload type value of the DSP channel.

Value range: 96 to 127

Default value: 97

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.25

hwEntDspG726R16kPayload

Integer32

This object indicates the G.726–16k payload type value of the DSP channel.

Value range: 96 to 127

Default value: 103

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.26

hwEntDspG726R24kPayload

Integer32

This object indicates the G.726–24k payload type value of the DSP channel.

Value range: 96 to 127

Default value: 104

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.27

hwEntDspG726R32kPayload

Integer32

This object indicates the G.726–32k payload type value of the DSP channel.

Value range: 96 to 127

Default value: 101

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.28

hwEntDspG726R40kPayload

Integer32

This object indicates the G.726–40k payload type value of the DSP channel.

Value range: 96 to 127

Default value: 105

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.29

hwEntDspAutoVBDSwitchMode

INTEGER

This object indicates the VBD switch mode.

The options are as follows:

  • 1: hostControl
  • 2: autoSwitch

Default value: hostControl(1)

read-write

current

1.3.6.1.4.1.2011.5.25.253.5.30

hwEntDspAlarmAdaptJitterBuffer

Integer32

This object indicates the alarm threshold for the dynamic jitter buffer of the DSP channel.

Value range: 0 to 150

Default value: 150

Unit: millisecond

read-write

current

Creation Restriction

No entry can be created in this table.

Modification Restriction

Users are allowed to configure the hwEntDspVbdPayload object. This object is valid only in the following scenarios:

  • H248/MGCP FAX: The value of hwEntFaxParametersVbdPtType is dynamic in the hwEntFaxParametersTable table.
  • H248/MGCP MODEM: The value of hwEntModemParametersVbdPtType is dynamic in the hwEntModemParametersTable table.
  • SIP FAX: The value of hwEntFaxParaVbdPtType is dynamic in the hwEntFaxParaTabl table.
  • SIP MODEM: The value of hwEntModemParaVbdPtType is dynamic in the hwEntModemParaTable table.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

None.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 509217

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next