No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwVapProfileTable

hwVapProfileTable

This table is used to configure and query VAP profile parameters.

The index of this table is hwVapProfileName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.20.1.1

hwVapProfileName

OCTET STRING(1–35)

not-accessible

This object indicates the name of a VAP profile. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.2

hwVapForwardMode

INTEGER{unknown(1),directForward(2),tunnel(3)}

read-write

This object indicates the service forwarding mode. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.5

hwVapAutoOffStartTime

OCTET STRING

read-write

This object indicates the start time when the VAP is disabled. The format is HH:MM:SS.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.7

hwVapTemporaryManagementSwitch

INTEGER{disable(1),enable(2)}

read-write

If this parameter is set to 2, the VAP automatically becomes the management VAP for offline APs after the AP is disconnected. It can still send signals so that maintenance personnel can access it to identify faults (the security mode is the non-authentication security mode and the SSID will be hidden). The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.8

hwVapServiceVlan

Unsigned32(1–4094)

read-write

This object indicates the service VLAN for the VAP. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.17

hwVapLearnIpv4Address

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the IPv4 address learning function. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.19

hwVapLearnIpv4AddressStrict

INTEGER{disable(1),enable(2),enable blackList(3)}

read-write

This object indicates the status of the strict address learning (only through the DHCP) function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.20

hwVapIpBindCheck

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the IP binding relationship check function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.24

hwVapDhcpTrustPort

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the radio interface DHCP trust function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.26

hwVapSecurityProfile

OCTET STRING(1–35)

read-write

The object indicates the security profile that is bound to the VAP. The default value is default.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.27

hwVapTrafficProfile

OCTET STRING(1–35)

read-write

The object indicates the traffic profile that is bound to the VAP. The default value is default.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.28

hwVapSsidProfile

OCTET STRING(1–35)

read-write

The object indicates the SSID profile that is bound to the VAP. The default value is default.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.29

hwVapAuthenticationProfile

OCTET STRING(0–35)

read-write

The object indicates the authentication profile that is bound to the VAP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.31

hwVapUccProfile

OCTET STRING(0–35)

read-write

The object indicates the UCC profile that is bound to the VAP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.32

hwVapUserProfile

OCTET STRING(0–35)

read-write

The object indicates the User profile that is bound to the VAP.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

Entries can be created in this table only when hwVapProfileRowStatus is set to createAndGo(4).

Modification Restriction

  • hwVapAutoOffStartTime and hwVapAutoOffEndTime must be configured at the same time.

  • To set hwVapForwardMode to softgre(4), configure hwSoftgreProfile and hwVapProfileRowStatus at the same time.

  • To set hwVapOptinon82InsertRidFormat to userDefined(3), configure hwVapOptinon82RidUserDefined at the same time.

  • To set hwVapOptinon82InsertCidFormat to userDefined(3), configure hwVapOptinon82CidUserDefined at the same time.

  • hwVapSecurityProfile and hwVapProfileRowStatus must be configured at the same time.

  • hwVapTrafficProfile and hwVapProfileRowStatus must be configured at the same time.

  • hwVapSsidProfile and hwVapProfileRowStatus must be configured at the same time.

  • hwVapAuthenticationProfile and hwVapProfileRowStatus must be configured at the same time.

  • hwVapSacProfile and hwVapProfileRowStatus must be configured at the same time.

  • hwVapUccProfile and hwVapProfileRowStatus must be configured at the same time.

Deletion Restriction

This table cannot be deleted when other profiles are bound to it. The default profile of this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 452879

Downloads: 48

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next