No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ospfAreaTable

ospfAreaTable

Information describing the configured parameters and cumulative statistics of one of the device's attached areas. The interfaces and virtual links are configured as part of these areas. Area 0.0.0.0, by definition, is the backbone area.

The index of this table is ospfAreaId.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.14.2.1.1

ospfAreaId

AreaID

Read-only

A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.2.1.2

ospfAuthType

OspfAuthenticationType

Read-create

The authentication type specified for an area. Additional authentication types may be assigned locally on a per Area basis.Value range: {none (0), simplePassword (1), md5 (2), reserved for specification by IANA (>2)}The default value is 0.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.2.1.3

ospfImportAsExtern

INTEGER{importExternal (1),importNoExternal (2), importNssa (3)}

Read-create

Indicates if an area is a stub area, NSSA, or standard area. Type-5 AS-external LSAs and type-11 Opaque LSAs are not imported into stub areas or NSSAs. NSSAs import AS-external data as type-7 LSAs.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.2.1.4

ospfSpfRuns

Counter32

Read-only

The number of times that the intra-area route table has been calculated using this area's link state database. This is typically done using Dijkstra's algorithm.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.2.1.5

ospfAreaBdrRtrCount

Gauge32

Read-only

The total number of Area Border Routers reachable within this area. This is initially zero and is calculated in each Shortest Path First (SPF) pass.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.2.1.6

ospfAsBdrRtrCount

Gauge32

Read-only

The total number of Autonomous System Border Routers reachable within this area. This is initially zero and is calculated in each SPF pass.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.2.1.7

ospfAreaLsaCount

Gauge32

Read-only

The total number of link state advertisements in this area's link state database, excluding AS-external LSAs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.2.1.8

ospfAreaLsaCksumSum

Integer32

Read-only

The 32-bit sum of the link state advertisements' LS checksums contained in this area's link state database. This sum excludes external (LS type-5) link state advertisements. The sum can be used to determine if there has been a change in a device's link state database, and to compare the link state database of two devices.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.2.1.9

ospfAreaSummary

INTEGER{noAreaSummary (1),sendAreaSummary (2)}

Read-create

The variable ospfAreaSummary controls the import of summary LSAs into stub and NSSA areas. It has no effect on other areas.If it is noAreaSummary, the device will not originate summary LSAs into the stub or NSSA area. It will rely entirely on its default route. If it is sendAreaSummary, the device will both summarize and propagate summary LSAs.The default value is noAreaSummary.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.2.1.10

ospfAreaStatus

RowStatus

Read-create

This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.2.1.11

ospfAreaNssaTranslatorRole

INTEGER {always (1),candidate (2)}

Read-create

Indicates an NSSA border router's ability to perform NSSA translation of type-7 LSAs into type-5 LSAs.

Currently, the maximum access is read-only; the default value candidate(2) is supported only.

1.3.6.1.2.1.14.2.1.12

ospfAreaNssaTranslatorState

INTEGER {enabled (1),elected (2),disabled (3)}

Read-only

Indicates if and how an NSSA border router is performing NSSA translation of type-7 LSAs into type-5 LSAs. When this object is set to enabled, the NSSA Border router's OspfAreaNssaExtTranslatorRole has been set to always. When this object is set to elected, a candidate NSSA Border router is Translating type-7 LSAs into type-5. When this object is set to disabled, a candidate NSSA border router is NOT translating type-7 LSAs into type-5.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.2.1.13

ospfAreaNssaTranslatorStabilityInterval

PositiveInteger

Read-create

The number of seconds after an elected translator determines its services are no longer required, that it should continue to perform its translation duties.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.2.1.14

ospfAreaNssaTranslatorEvents

Counter32

Read-only

Indicates the number of translator state changes that have occurred since the last boot-up.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The entries in this table cannot be created.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

Before reading this MIB table, run the ospf mib-binding process-id command to bind the OSPF process to SNMP.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 499659

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next