No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwVrrpTrackInterTable

hwVrrpTrackInterTable

This table is used to describe the configuration of the attributes of the interface tracked by VRRP.

The indexes of this table are as follows:

  • hwVrrpTrackInterVRID

  • hwVrrpTrackInterStandByIfnet

  • hwVrrpTrackInterIfnet

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.127.2.1.1.1

hwVrrpTrackInterVRID

VrId

Not-accessible

The object indicates the ID of the VRRP backup group.

The value ranges from 1 to 255.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.127.2.1.1.2

hwVrrpTrackInterStandByIfnet

InterfaceIndex

Not-accessible

The object indicates the index of the interface of the backup group, which is used with the backup group ID to uniquely identify a backup group.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.127.2.1.1.3

hwVrrpTrackInterIfnet

InterfaceIndex

Not-accessible

The object indicates the index of the tracked interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.127.2.1.1.4

hwVrrpTrackInterPriReduce

Integer32 (0..255)

Read-create

The value of this object identifies the decreasing value of the priority of the VRRP backup group when the monitored interface goes Down.

The value is an integer that can be 0 or 1 to 255.
  • 0: value adopted when the object is not set

  • 1 to 255: value can be set for the object

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.127.2.1.1.5

hwVrrpTrackInterOperRowStatus

RowStatus

Read-create

The object indicates the status of the row.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.127.2.1.1.6

hwVrrpTrackInterPriIncrease

Integer32 (0..255)

Read-create

The value of this object identifies the increasing value of the priority of the VRRP backup group when the monitored interface goes Down.

The value is an integer that can be 0 or 1 to 255.
  • 0: value adopted when the object is not set

  • 1 to 255: value can be set for the object

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

hwVrrpTrackInterVRID must be a value that exists in vrrpOperVrId of VRRP-MIB.mib VrrpOperEntry.

The VRRP backup group cannot be an IP address owner or increase VRRP priorities of devices to perform a master/backup switchover when the non-preemption mode is used.

The number of rows in this table cannot be greater than 8.

Modification Restriction

The entries in this table can be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 451961

Downloads: 48

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next