No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dot3CollTable

dot3CollTable

A collection of collision histograms for a particular set of interfaces, including statistical information of CSMA/CD sub layer of Ethernet.

The indexes of this table are ifIndex and dot3CollCount.

OID

Object

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.10.7.5.1.2

dot3CollCount

Integer32 (1..16)

Not-accessible

The number of per-frame media collisions for which a particular collision histogram cell represents the frequency on a particular interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.7.5.1.3

dot3CollFrequencies

Counter32

Read-only

A count of individual MAC frames for which the transmission (successful or otherwise) on a particular interface occurs after the frame has experienced exactly the number of collisions in the associated dot3CollCount object.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The device must contain an interface to read the table. The number of packets after the statistics can be read only if the interface and the number of collisions are specified. This function can only be supported by the 21143 chip in half-duplex mode.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 444044

Downloads: 46

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next