No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwIsisRouteLeakTable

hwIsisRouteLeakTable

You can obtain and set the objects in hwIsisRouteLeakTable.

The indexes of this table are hwIsisProcIdIndex, hwIsisIpTypeIndex, hwIsisMTIdIndex, and hwIsisRouteLeakTypeIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.24.2.1.7.1.1

hwIsisRouteLeakTypeIndex

INTEGER

Not-accessible

This object indicates the index of the route leaking type:
  • level1intolevel2(1): indicates that Level-1 routes are leaked to Level-2.
  • level2intolevel1(2): indicates that Level-2 routes are leaked to Level-1.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.7.1.2

hwIsisRouteLeakTag

Unsigned32

Read-create

This object indicates the tag of route leaking.

If the tag is not configured, the obtained value will be 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.7.1.3

hwIsisRouteLeakFilterPolicyType

INTEGER

Read-create

This object indicates the type of the policy used for route leaking:
  • none(0): indicates that no policy type is specified.
  • basicAcl(1): indicates the number of a basic ACL.
  • aclName(2): indicates the ACL name.
  • ipPrefix(3): indicates an IP prefix.
  • routePolicy(4): indicates the routing policy.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.7.1.4

hwIsisRouteLeakFilterPolicyBasicAcl

Integer32

Read-create

The value of this object identifies the number of a basic ACL. The value ranges from 2000 to 2999. The value 0 indicates that no basic ACL number is specified.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.7.1.5

hwIsisRouteLeakFilterPolicyPolicyName

OctetString

Read-create

This object indicates the policy name of route leaking. If the policy type is aclName, the value is a string of 1 to 32 characters.If the policy type is ipPrefix, the value is a string of 1 to 169 in the case of an IPv4 prefix, and is a string of 1 to 19 characters in the case of an IPv6 prefix. If the policy type is routePolicy, the length of this value ranges from 1 to 40. By default, the length is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.7.1.6

hwIsisRouteLeakStatus

RowStatus

Read-create

This object indicates the row status of this table:
  • createAndGo(4): indicates that a row is created.
  • destroy(6): indicates that a row is deleted.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

Entries can be created in this table.

If the entry to be created already exists, inconsistentValue is returned.

Modification Restriction

When an IS-IS process is in the Disable state or the system is in the memory shortage, you cannot perform the Set operation on this table.

When the data of multiple entries is delivered in the same message block, if the data of one entry is incorrect, the data of the entire message block cannot be delivered to the IS-IS module.

The default value of hwIsisRouteLeakEntry is level1intolevel2.

When the Set operation is performed on hwIsisRouteLeakTag, the value ranges from 1 to 4294967295. When the Get operation is performed on hwIsisRouteLeakTag, the value ranges from 0 to 4294967295. If no tag value is set, the obtained tag value is 0.

The default value of hwIsisRouteLeakFilterPolicyType is 0. When the value of hwIsisRouteLeakFilterPolicyTypepolicyType is basicAcl, hwIsisRouteLeakFilterPolicyBasicAcl is set. The value of hwIsisRouteLeakFilterPolicyBasicAcl obtained through the Set operation is 2000 to 2999, and the value obtained through the Get operation is 2000 to 2999. When the value of hwIsisRouteLeakFilterPolicyTypepolicyType is routePolicy, hwIsisRouteLeakFilterPolicyPolicyName is set. The value of hwIsisRouteLeakFilterPolicyPolicyName obtained through the Set operation is 1 to 169, and the value obtained through the Get operation is 0 to 169.

Deletion Restriction

The entries in this table can be deleted.

If the entry to be deleted does not exist, noError is returned.

If hwIsisRouteLeakTable has the destroy value, only the destroy value is executed. In this case, other inputs are not processed or authenticated.

Access Restriction

When the Get operation is performed on hwIsisRouteLeakStatus, only the active state is obtained. If the row to be read does not exist, "NO SUCH INSTANCE" is returned.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 483150

Downloads: 48

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next