No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwAPSpecificRadioTable

hwAPSpecificRadioTable

This table records the information about profiles bound based on radio in an AP, including 5G radio profile, and WDS profile.

Indexes of this table are hwAPSpApMac and hwAPSpRadio.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.9.1.1

hwAPSpRadio

Unsigned32(0–2)

not-accessible

This object indicates the radio ID. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.2

hwAPSp5gRadioProfile

OCTET STRING(1–35)

read-write

This object indicates the bound 5G radio profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.4

hwAPSpWdsProfile

OCTET STRING(1–35)

read-write

This object indicates the bound WDS profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.8

hwAPSpRadioRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.9

hwAPSpRadio2gProfile

OCTET STRING(0–35)

read-write

This object indicates the bound 2G radio profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.11

hwAPSpWdsWhitelistProfile

OCTET STRING(0–35)

read-write

This object indicates the bound WDS whitelist profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.12

hwAPSpRadioSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the radio switch. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.13

hwAPSpRadioChannel

Unsigned32(1–13)

read-write

This object indicates a radio-frequency channel. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.14

hwAPSpRadioBandwidth

INTEGER{ht20(1),ht40Plus(2),ht40Minus(3)}

read-write

This object indicate a bandwidth. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.15

hwAPSpRadioEirp

Unsigned32(0–30)

read-write

This object indicate the power level. The default value is 0.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.16

hwAPSpRadioAntennaGain

Unsigned32(0xFFFFFFFF|0–30)

read-write

This object indicates antenna gains. The default value 0xFFFFFFFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.17

hwAPSpRadioCoverageDistance

Unsigned32(1–400|65535)

read-write

This object indicates the radio coverage distance. The unit is 0.1 km.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.18

hwAPSpRadioWorkMode

INTEGER{normal(1)}

read-write

This object indicates the radio working mode.
  • normal(1): The radio works in normal mode.
The default value is normal(1).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.19

hwAPSpRadioFrequency

INTEGER{frequency2G(1),frequency5G(2)}

read-write

This object indicates the setting of the frequency band for radio 0 and radio 2. The default value is invalid.

  • 1: frequency2G
  • 2: frequency5G

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.22

hwAPSpWidsAttackDetectEnBmp

Unsigned32

read-write

This object indicates the bitmap of the attack detection function.

  • bit0: weak-iv
  • bit1: spoof
  • bit2: flood
  • bit3: wpa-psk
  • bit4: wpa2-psk
  • bit5: wapi-psk
  • bit6: wep-psk

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.24

hwAPSpRadioApId

Unsigned32

read-only

AP ID.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

The prerequisite is that the corresponding AP already exists.

Modification Restriction

Modifications of the entries in this table takes effect only after hwAPSpRadioChannel and hwAPSpRadioBandwidth are bound.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 504628

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next