No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwMflpVlanCfgTable

hwMflpVlanCfgTable

This table configures MAC address flapping detection in the VLAN view to detect Ethernet loops in the VLAN. The actions can be configured. If MAC address flapping occurs, configure the system to send a trap or block the interface. If the action is block, set the interface blocking time and the number of detection attempts.

The index of this table is hwMflpVlanId.

OID

Object Name

Syntax

Description

Max Access

Implemented Specifications

1.3.6.1.4.1.2011.5.25.160.1.1.1.1

hwMflpVlanId

Integer

This object indicates the index of the VLAN where MAC address flapping occur. The value ranges from 1 to 4094.

Inaccessible

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.160.1.1.1.5

hwMflpVlanCfgAction

INTEGER

{

block(1),

alarmOnly(2)

}

This object indicates the MAC address flapping detection action.

1: The system blocks an interface.

2: The system sends only traps.

Read-create

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.160.1.1.1.6

hwMflpVlanCfgBlockTime

Unsigned32 (10–65535)

This object indicates the duration when an interface is blocked. The value is 0 if the system is configured to send only traps.

The value ranges from 10 to 65535.

Read-create

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.160.1.1.1.7

hwMflpVlanCfgRetryTimes

Unsigned32

(1–5)

This object indicates the number of retry times the interface is blocked permanently. It can be set only when the action is set to block. The value is 0 if the system is configured to send only traps.

The value ranges from 1 to 5.

Read-create

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.160.1.1.1.9

hwMflpVlanCfgAlarmReason

DisplayString

This object indicates the cause that the interface is blocked. The object is used to generate alarms.

Accessible-for-notify

current

1.3.6.1.4.1.2011.5.25.160.1.1.1.10

hwMflpVlanCfgRowstatus

Integer

This object indicates the row status.

1: active

2: notInService

3: notReady

4: createAndGo

5: createAndWait

6: destroy

Read-create

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.160.1.1.1.11

hwMflpVlanDetectMAC

DisplayString

This object indicates the detect MAC, which is only used for trap.

accessible-for-notify

current

Creation Restriction

Entries can be created in this table.

When hwMflpVlanCfgAction is set to block(1), the value of hwMflpVlanCfgBlockTime ranges from 10 to 65535 and the value of hwMflpVlanCfgRetryTimes ranges from 1 to 5.

When hwMflpVlanCfgAction is set to alarmOnly(2), hwMflpVlanCfgBlockTime and hwMflpVlanCfgRetryTimes must be set to 0.

Modification Restriction

No entry in this table can be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 507223

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next