No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwIsisProcBaseTable

hwIsisProcBaseTable

This table is used to obtain and set the values of the objects in hwIsisProcBaseTable associated with IS-IS.

The index of this table is hwIsisProcIdIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.1

hwIsisProcIdIndex

Integer32

Not-accessible

The value of this object identifies the IS-IS process ID. The value ranges from 1 to 65535.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.2

hwIsisProcVpnName

OctetString

Read-create

The value of this object identifies the name of the VPN instance bound to the IS-IS process. The value ranges from 1 to 31.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.3

hwIsisProcVpn6Name

OctetString

Read-create

The value of this object identifies the name of the VPNv6 instance bound to the IS-IS process. The value ranges from 1 to 31.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.4

hwIsisProcAreaAuthType

INTEGER

Read-create

The value of this object identifies the type of IS-IS area authentication.
  • null(0): Area authentication is not configured.
  • md5(1): The password is sent after being encrypted through MD5.
  • simple(2): The password is sent in the form of simple text.
  • keychain(3): The key chain table that changes with time is sent after being encrypted through MD5.
  • hmac-sha256(4): The password is sent after being encrypted through HMAC-SHA256.

By default, area authentication is not configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.5

hwIsisProcAreaAuthPasswordName

OctetString

Read-create

This object indicates the password of IS-IS area authentication. The password is a string of characters.
  • If the IS-IS area authentication mode is simple, the password is a string of 0 to 16 characters.
  • If the IS-IS area authentication mode is MD5 or HMAC-SHA256, the password is a string of 0 to 392 characters.
  • If the IS-IS area authentication mode is keychain, the name is a string of 0 to 47 characters.

Zero-length means no configuration.

When read, hwIsisProcAreaAuthPasswordName always returns an octet string of length zero.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.6

hwIsisProcAreaAuthPacketAuthMode

INTEGER

Read-create

The value of this object identifies the packet authentication mode of IS-IS area authentication:

  • none(0): Authentication mode is not configured.
  • authenticateall(1): Encapsulates authentication information for both transmitted and received LSPs and SNPs.
  • allsendonly(2): Encapsulates authentication information for both generated LSPs and SNPs; does not authenticate received LSPs or SNPs.
  • snppacketauthenticationavoid(3): Encapsulates authentication information for only generated LSPs and authenticates received LSPs.
  • snppacketsendonly(4): Encapsulates authentication information for generated LSPs and SNPs; authenticates only received LSPs but does not authenticate received SNPs.

By default, authentication is not configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.7

hwIsisProcAreaAuthCode

INTEGER

Read-create

The value of this object identifies the code of area authentication.

  • none(0): The authentication code is not configured.
  • osi(10): indicates OSI authentication.
  • ip(133): indicates IP authentication.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.8

hwIsisProcDomainAuthType

INTEGER

Read-create

The value of this object identifies the type of IS-IS router domain authentication.
  • null(0): Domain authentication is not configured.
  • md5(1): The password is sent after being encrypted through MD5.
  • simple(2): The password is sent in the form of simple text.
  • keychain(3): The key chain table that changes with time is sent after being encrypted through MD5.

By default, IS-IS route domain authentication is disabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.9

hwIsisProcDomainAuthPasswordName

OctetString

Read-create

This object indicates the password of IS-IS routing domain authentication. The password is a string of characters.
  • If the IS-IS routing domain authentication mode is simple, the password is a string of 0 to 16 characters.
  • If the IS-IS routing domain authentication mode is MD5, the password is a string of 0 to 392 characters.
  • If the IS-IS routing domain authentication mode is keychain, the name is a string of 0 to 47 characters.

The length 0 indicates that the password of IS-IS routing domain authentication is not configured.

When read, hwIsisProcDomainAuthPasswordName always returns an octet string of length zero.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.10

hwIsisProcDomainAuthPacketAuthMode

INTEGER

Read-create

The value of this object identifies the packet authentication mode of IS-IS route domain authentication.

  • none(0): Authentication mode is not configured.
  • authenticateall(1): Encapsulates authentication information for both transmitted and received LSPs and SNPs.
  • allsendonly(2): Encapsulates authentication information for both generated LSPs and SNPs; does not authenticate received LSPs or SNPs.
  • snppacketauthenticationavoid(3): Encapsulates authentication information for only generated LSPs and authenticates received LSPs.
  • snppacketsendonly(4): Encapsulates authentication information for generated LSPs and SNPs; authenticates only received LSPs but does not authenticate received SNPs.

By default, authentication is not configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.11

hwIsisProcDomainAuthCode

INTEGER

Read-create

The value of this object identifies the code of domain authentication.

  • none(0): The authentication code is not configured.
  • osi(10): indicates OSI authentication.
  • ip(133): indicates IP authentication.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.12

hwIsisProcLevel

INTEGER

Read-create

The value of this object identifies the level of the IS-IS process.

  • level1(1): indicates Level 1.
  • level2(2): indicates Level 2.
  • level12 (3): indicates Level-1-2.

By default, the level of an IS-IS process is Level-1-2.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.13

hwIsisProcL1FlashFloodCount

Integer32

Read-create

The value of this object identifies the counter of Level-1 LSPs on the interface. The value is an integer ranging from 0 to 15. The value 0 indicates that no counter is configured. The default value is 5.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.14

hwIsisProcL1FlashFloodInterval

Integer32

Read-create

The value of this object identifies the intervals for Level-1 LSP flooding. The value ranges from 10 to 50000, in milliseconds. The default value is 10 ms.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.15

hwIsisProcL2FlashFloodCount

Integer32

Read-create

The value of this object identifies the counter of Level-2 LSPs on the interface. The value is an integer ranging from 0 to 15. The value 0 indicates that no counter is configured. The default value is 5.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.16

hwIsisProcL2FlashFloodInterval

Integer32

Read-create

The value of this object identifies the intervals for Level-2 LSP flooding. The value ranges from 10 to 50000, in milliseconds. The default value is 10 ms.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.17

hwIsisProcLogPeerChange

INTEGER

Read-create

Generates a log when the status of the peer changes.

  • null(0): not configured
  • enabledwithouttopology(1): IPv4 topology
  • enabledwithtopology(2): IPv6 topology

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.18

hwIsisProcTimerRefresh

Integer32

Read-create

The value of this object identifies the timer of LSP refreshing. The value ranges from 1 to 65534, in seconds. The default value is 900s.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.19

hwIsisProcTimerMaxAge

Integer32

Read-create

The value of this object identifies the maximum Keepalive time of the LSP. The value ranges from 2 to 65535, in seconds. The default value is 1200s.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.20

hwIsisProcL1TimerLspGenMaxInterval

Integer32

Read-create

The value of this object identifies the timer for the maximum delay of Level-1 LSPs with the same LSP ID. The value ranges from 1 to 120, in seconds. By default, the value is 2s.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.21

hwIsisProcL1TimerLspGenInitInterval

Integer32

Read-create

The value of this object identifies the delay timer that initially triggers a Level-1 LSP. The value ranges from 0 to 60000, in milliseconds.

By default, the value is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.22

hwIsisProcL1TimerLspGenIncrInterval

Integer32

Read-create

The value of this object identifies the delay timer for generating two Level-1 LSPs with the same LSP ID. The value ranges from 1 to 60000, in milliseconds.

By default, the value is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.23

hwIsisProcL2TimerLspGenMaxInterval

Integer32

Read-create

The value of this object identifies the timer for the maximum delay of Level-2 LSPs with the same LSP ID. The value ranges from 1 to 120, in seconds. By default, the value is 2s.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.24

hwIsisProcL2TimerLspGenInitInterval

Integer32

Read-create

The value of this object identifies the delay timer that initially triggers a Level-2 LSP. The value ranges from 1 to 60000, in milliseconds.

By default, the value is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.25

hwIsisProcL2TimerLspGenIncrInterval

Integer32

Read-create

The value of this object identifies the delay timer for generating two Level-2 LSPs with the same LSP ID. The value ranges from 1 to 60000, in milliseconds.

By default, the value is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.26

hwIsisProcTimerSPFMaxInterval

Integer32

Read-create

The value of this object identifies the maximum intervals for SPF calculation. The value ranges from 1 to 120, in seconds. By default, the value is 5s.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.27

hwIsisProcTimerSPFInitInterval

Integer32

Read-create

The value of this object identifies the delay timer for initial SPF calculation. The value ranges from 0 to 60000, in milliseconds. By default, the interval is 50 ms.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.28

hwIsisProcTimerSPFIncrInterval

Integer32

Read-create

The value of this object identifies the incremental delay timer for two SPF calculations. The value ranges from 0 to 60000, in milliseconds. By default, the interval is 200 ms.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.29

hwIsisProcCostStyle

INTEGER

Read-create

Configures the cost type of the IS-IS process:
  • narrow(1): the narrow type
  • narrowcompatible(2): the narrow-compatible type
  • compatible(3): compatible type
  • wide(4): wide type
  • widecompatible(5): wide-compatible type
  • narrowcompatiblerelax(6): narrow-compatible relax-spf-limit type
  • compatible-relax(7): compatible relax-spf-limit type

By default, the cost type of an IS-IS process is narrow.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.30

hwIsisProcDynamicName

OctetString

Read-create

Configures the name of the IS-IS dynamic host. The value is a string of 1 to 64 characters.

When the length is 0, the configured IS-IS dynamic host name is deleted.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.31

hwIsisProcGREnabled

TruthValue

Read-create

Whether to enable IS-IS GR.
  • true(1): enables IS-IS GR.
  • false(2): does not enable IS-IS GR.

By default, IS-IS GR is disabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.32

hwIsisProcGRInterval

Integer32

Read-create

The value of this object identifies the maximum intervals for enabling GR. The value ranges from 30 to 1800, in seconds. By default, the value is 300 seconds.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.33

hwIsisProcGRSuppresSAEnabled

TruthValue

Read-create

This object indicates that the SA bit in the sent Hello packet is set to 1 after the GR-enabled device is started:
  • true(1): enables this function.
  • false(2): disables this function.

By default, IS-IS does not suppress Hello PDUs from carrying SA bits.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.34

hwIsisProcTEEnableLevel

INTEGER

Read-create

Enables IS-IS TE.
  • none(0): does not enable IS-IS TE.
  • level1(1): enables Level-1 TE.
  • level2(2): enables Level-2 TE.
  • level12(3): enables Level-1-2 TE.

By default, IS-IS TE is disabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.35

hwIsisProcBFDEnabled

TruthValue

Read-create

Whether to enable BFD on each interface.
  • true(1): enables BFD on each interface.
  • false(2): does not enable BFD on each interface.

By default, BFD is disabled on each interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.36

hwIsisProcBFDFrrBindEnabled

TruthValue

Read-create

Enables BFD-FRR binding on each interface.
  • true(1): enables BFD-FRR binding on each interface.
  • false(2): does not enable BFD-FRR binding on each interface.

By default, BFD-FRR binding is disabled on each interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.37

hwIsisProcBFDMinTxInterval

Integer32

Read-create

The value of this object identifies the minimum interval for sending BFD packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.38

hwIsisProcBFDMinRecvInteval

Integer32

Read-create

The value of this object identifies the minimum interval for receiving BFD packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.39

hwIsisProcBFDMultiplier

Integer32

Read-create

The value of this object identifies the local detection multiplier. The value ranges from 0 to 255.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.40

hwIsisProcIpv6EnableTopologyType

INTEGER

Read-create

This object indicates that IPv6 IS-IS is enabled:
  • disable(0): disables IPv6 IS-IS.
  • standard(1): specifies the topology type to be the standard mode.
  • ipv6(2): specifies the topology type to be the IPv6 mode.
  • compatible(3): specifies the topology type to be the compatible mode.
  • compatibleenablemtspf(4): indicates that SPF is run in an IPv6 topology in compatible mode.

By default, IPv6 IS-IS is not enabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.41

hwIsisProcRowStatus

RowStatus

Read-create

This object supports settings of two values.
  • createAndGo(4): A row is created.
  • destroy(6): A row is deleted.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.42

hwIsisProcOptionalChecksumEnabled

TruthValue

Read-create

This object indicates whether optional checksum is enabled on the interface.
  • true (1): The optional checksum function is enabled. That is, CSNP, PSNP, and Hello packets carry the optional checksum TLV.
  • false (2): The optional checksum function is disabled. That is, CSNP, PSNP, and Hello packets do not carry the optional checksum TLV.
By default, the optional checksum function is disabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.47

hwIsisProcAreaAuthKeychainName

OctetString

read-create

This object indicates the keychain name of IS-IS area authentication.

The name is a string of 0 to 47 characters. The length 0 indicates that no IS-IS area authentication keychain name is configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.1.1.48

hwIsisProcDomainAuthKeychainName

OctetString

read-create

This object indicates the keychain name of IS-IS domain authentication.

The name is a string of 0 to 47 characters. The length 0 indicates that no IS-IS domain authentication keychain name is configured.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

You can create entries in this table.

If the entry to be created already exists, inconsistentValue is returned.

Modification Restriction

When an IS-IS process is in the Disable state or the system is in the memory shortage, you cannot perform the Set operation on this table.

When the data of multiple entries is delivered in the same message block, if the data of one entry is incorrect, the data of the entire message block cannot be delivered to the IS-IS module.

If the value of hwIsisProcDomainAuthType is 0, it indicates that domain authentication is not configured and the data associated with domain authentication is not processed. hwIsisProcDomainAuthPasswordName, hwIsisProcDomainAuthPacketAuthMode, and hwIsisProcDomainAuthCode can be configured only when they are all bound to hwIsisProcDomainAuthType. You cannot configure a single object separately. The value range of hwIsisProcDomainAuthPasswordName varies with the value of hwIsisProcDomainAuthType.

The values of hwIsisProcAreaAuthPacketAuthMode and hwIsisProcDomainAuthPacketAuthMode cannot be set to 0. When no authentication is configured, the obtained value of hwIsisProcAreaAuthPacketAuthMode or hwIsisProcDomainAuthPacketAuthMode is 0.

You can configure hwIsisProcAreaAuthCode only when configuring simple or MD5 authentication. Keychain authentication does not support the configuration of hwIsisProcAreaAuthCode. By default, OSI authentication is adopted.

If hwIsisProcL1FlashFloodCount is set to 0, it indicates that LSP fast convergence is disabled and the value of hwIsisProcL1FlashFloodInterval is not processed.

The value of hwIsisProcL1FlashFloodInterval cannot be set to 0, and it ranges from 10 to 50000. If only the value of hwIsisProcL1FlashFloodInterval is entered, hwIsisProcL1FlashFloodCount uses the default value of 5. If only the value of hwIsisProcL1FlashfloodCount is entered, hwIsisProcL1FlashfloodInterval adopts the default value of 10. The new configuration overwrites the previous configuration.

The values of hwIsisProcGRInterval and hwIsisProcGRSuppresSAEnabled can be modified only when the value of hwIsisProcGREnabled is set to true.

The value range of hwIsisProcBFDMinTxInterval or hwIsisProcBFDMinRecvInteval is 1 to 65535, but you need to obtain the actual value range from the license file.

The value range of hwIsisProcBFDMinTxInterval or hwIsisProcBFDMinRecvInteval is 100 to 1000, the default value 1000 milliseconds.

The value of hwIsisProcBFDMultiplier ranges from 1 to 255, but you need to obtain its actual value range from the license file.

The value of hwIsisProcBFDMultiplier ranges from 1 to 255, and the default value is 3 milliseconds.

Deletion Restriction

The entries in this table can be deleted.

If the entry to be deleted does not exist, noError is returned.

If hwIsisProcBaseTable has the destroy value, only the destroy value is executed. In this case, other inputs are not processed or authenticated.

Access Restriction

When the Get operation is performed on hwIsisProcRowStatus, only the active state is obtained. If the row to be read does not exist, "NO SUCH INSTANCE" is returned.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 480419

Downloads: 48

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next