No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Relationships Between Tables

Relationships Between Tables

Figure 154-1  Relationship between the PIM interface table, neighbor table, and secondary IP address table

Figure 154-1 shows the relationship between pimInterfaceTable, pimNeighborTable and pimNbrSecAddressTable.

Because one PIM interface may have multiple PIM neighbors, indexes of pimInterfaceTable and pimNeighborTable should be the same. You can obtain all the neighbors of a PIM interface through pimInterfaceIfIndex.

One neighbor may have multiple secondary IP addresses because pimNeighborTable and pimNbrSecAddressTable have same pimNeighborIfIndex, pimNeighborAddressType, and pimNeighborAddress indexes. Through the three indexes, you can obtain all the secondary IP addresses of a neighbor.

Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 511687

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next