No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



Object Name


Max Access


Implemented Specifications




An indication of whether this Label Switching Router supports loop detection.
  • none(1) -- Loop Detection is not supported on this LSR.
  • other(2) -- Loop Detection is supported but by a method other than those listed below.
  • hopCount(3) -- Loop Detection is supported by Hop Count only.
  • pathVector(4) -- Loop Detection is supported by Path Vector only.
  • hopCountAndPathVector(5) -- Loop Detection is supported by both Hop Count And Path Vector.
Since Loop Detection is determined during Session Initialization, an individual session may not be running with loop detection. This object simply gives an indication of whether or not the LSR has the ability to support Loop Detection and which Loop Detection type.

This object is implemented as defined in the corresponding MIB files.

Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 500204

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next