No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
nqaHistoryTable

nqaHistoryTable

This table is used to take statistics of the history information about test instances. It describes the history information about the packets of the test instance.

The indexes of this table are nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaHistoryIndex, nqaHistoryHopIndex, and nqaHistoryProbeIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.5.1.1.1

nqaHistoryIndex

Integer32 (1..'7FFFFFFF'h)

Not-accessible

The value of this object identifies this table. It depends on the scheduling times of the test instance.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.1.1.2

nqaHistoryHopIndex

Integer32 (1..255)

Not-accessible

The value of this object identifies each hop. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default value is 1.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.1.1.3

nqaHistoryProbeIndex

Integer32 (1..'7FFFFFFF'h)

Not-accessible

The value of this object identifies test instance probes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.1.1.4

nqaHistoryTimeStamp

DateAndTime

Read-only

This object indicates the start time of a probe.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.1.1.5

nqaHistoryAddressType

InetAddressType

Read-only

This object indicates the address type of the history record.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.1.1.6

nqaHistoryAddress

InetAddress

Read-only

This object indicates the destination address of the test. For Traceroute, it is the destination address of each hop.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.1.1.7

nqaHistoryCompletionTime

INTEGER

  • success(1)
  • timeout(2)
  • drop(3)
  • busy(4)
  • overThreshold(5)
  • disconnected(6)
  • noConnected(7)

Read-only

The value of this object identifies the time of a probe to finish the test. The value of this object is reported as 0 when it is not possible to transmit a probe.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.5.1.1.8

nqaHistoryFinishState

INTEGER

Read-only

The value of this object identifies the status of a probe.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 446406

Downloads: 46

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next