No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwIsisProcMTExtTable

hwIsisProcMTExtTable

You can obtain and set the objects in hwIsisProcMTExtTable.

The indexes of this table are hwIsisProcIdIndex, hwIsisIpTypeIndex, and hwIsisMTIdIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.1

hwIsisIpTypeIndex

InetAddressType

Not-accessible

This object indicates the IP protocol type:
  • ipv4(1): indicates IPv4.
  • ipv6(2): indicates IPv6.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.2

hwIsisMTIdIndex

Integer32

Not-accessible

The value of this object identifies the MT ID.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.3

hwIsisMTName

OctetString

Read-create

This object indicates the name of the topology enabled for an IS-IS process. The value is a string of 1 to 31 characters.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.4

hwIsisProcDefRoutAdvType

Enumeration

Read-create

This object is used to set the mode in which default routes are advertised:
  • null(0): indicates that default routes are not advertised.
  • always(1): indicates that default routes are always advertised.
  • matchdefault(2): If there is the default route that is generated by another routing protocol or another IS-IS process in the routing table, this default route is advertised in an LSP. If this default route is deleted from the routing table, this default route is not advertised in the LSP.
  • routepolicy(3): indicates that default routes are advertised according to the routing policy.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.5

hwIsisProcDefRoutAdvPolicyName

OctetString

Read-create

This object indicates the routing policy name. The name is a string of 0 to 40 characters.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.6

hwIsisProcDefRoutAdvCost

Unsigned32

Read-create

This object is used to set the cost of a default route.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.7

hwIsisProcDefRoutAdvTag

Unsigned32

Read-create

This object is used to set the administrative tag of a default route.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.8

hwIsisProcDefRoutAdvLevel

Enumeration

Read-create

This object is used to set the level of a default route:
  • level1(1): indicates Level-1.
  • level2(2): indicates Level-2.
  • level12(3): indicates Level-1-2.

By default, the level of a default route is Level-2.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.9

hwIsisProcDefRoutAdvAvoidLearnEnabled

TruthValue

Read-create

This object indicates whether an IS-IS process is prevented from learning default routes or adding them to the routing table:
  • true(1): indicates that an IS-IS process is prevented from learning default routes or adding them to the routing table.
  • false(2): indicates that an IS-IS process can learn default routes and then add them to the routing table.

By default, an IS-IS process can learn default routes and then add them to the routing table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.10

hwIsisProcL1CircuitCost

Integer32

Read-create

This object is used to set the Level-1 costs of all interfaces.

If the cost-style of the process is wide or wide-compatible, the value of this object ranges from 1 to 16777215; otherwise, the value ranges from 1 to 63.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.11

hwIsisProcL2CircuitCost

Integer32

Read-create

This object is used to set the Level-2 costs of all interfaces.

If the cost-style of the process is wide or wide-compatible, the value of this object ranges from 1 to 16777215; otherwise, the value ranges from 1 to 63.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.12

hwIsisProcPrefValue

Integer32

Read-create

This object is used to set the preference of an IS-IS route. The value ranges from 1 to 255, and the default value is 15.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.13

hwIsisProcPrefPolicyName

OctetString

Read-create

This object indicates the name of the routing policy used for route filtering. The name is a string of 1 to 40 characters.

Zero-length indicates that no routing policy name is configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.14

hwIsisProcMaxLoadBalance

Integer32

Read-create

This object is used to set the number of equal-cost routes. The value range and the default value depend on the license file.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.15

hwIsisProcL1CircuitDefaultTag

Unsigned32

Read-create

This object is used to set the default administrative tag of an IS-IS Level-1 route.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.16

hwIsisProcL2CircuitDefaultTag

Unsigned32

Read-create

This object is used to set the default administrative tag of an IS-IS Level-2 route.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.17

hwIsisProcBandWidthReference

Unsigned32

Read-create

This object is used to set the reference bandwidth.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.18

hwIsisProcAutoCostEnabled

TruthValue

Read-create

This object indicates whether automatic interface cost calculation is enabled:
  • true(1): indicates that automatic interface cost calculation is enabled.
  • false(2): indicates that automatic interface cost calculation is disabled.

By default, automatic interface cost calculation is disabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.19

hwIsisProcSetOverLoad

Enumeration

Read-create

This object indicates whether a device is enabled to notify its neighbors that its status is Overload:
  • disable (0): indicates that a device is disabled from notifying its neighbors that its status is Overload.
  • enable(1): indicates that a device is enabled to notify its neighbors that its status is Overload.
  • onstartup(2): When a device is restarted or becomes faulty, it notifies its neighbors that its status is Overload.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.20

hwIsisProcSetOverLoadAllowRoute

Enumeration

Read-create

This object indicates that the type of routes to be advertised when a device is in the Overload state:
  • null(0): indicates that no route type is specified.
  • external(1): indicates the imported external routes.
  • interlevel(2): indicates the leak routes.
  • externalandinterlevel(3): indicates the imported external and leak routes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.21

hwIsisProcOnStartInterval

Integer32

Read-create

The value of this object identifies the interval for waiting to clear the overload bit after the system is started. The value ranges from 5 to 86400, in seconds. The default value is 600s.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.22

hwIsisProcOnStartStartFromPeer

OctetString

Read-create

This object indicates the system ID of a neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.23

hwIsisProcOnStartFromPeerInterval

Integer32

Read-create

The value of this object identifies the maximum interval for waiting to clear the overload bit after the system is started and the neighbor relationship is established. The value ranges from 5 to 86400, in seconds. The default value is 1200s.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.24

hwIsisProcOnStartWaitForBgpEnabled

TruthValue

Read-create

This object indicates whether the function of waiting for BGP convergence is enabled:
  • true(1): indicates that the function of waiting for BGP convergence is enabled.
  • false(2): indicates that the function of waiting for BGP convergence is disabled.

By default, the function of waiting for BGP convergence is disabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.25

hwIsisProcMTStatus

RowStatus

Read-create

This object indicates the row status of this table:
  • createAndGo(4): indicates that a row is created.
  • destroy(6): indicates that a row is deleted.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.26

hwIsisProcL1RedistMaxLimit

Unsigned32

Read-create

This object indicates the maximum number of external routes that are advertised in the IS-IS Level-1 area. The value ranges from 0 to 10000000 with the default value 0 which indicates that there is no limit in the maximum number.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.27

hwIsisProcL2RedistMaxLimit

Unsigned32

Read-create

This object indicates the maximum number of external routes that are advertised in the IS-IS Level-2 area. The value ranges from 0 to 10000000 with the default value 0 which indicates that there is no limit in the maximum number.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.28

hwIsisProcL1UpperRedistThreshold

Unsigned32

Read-create

This object indicates the proportion of the number of imported external routes in the total number of routes in the IS-IS Level-1 area. The value ranges from 0 to 100, and the default value is 90. An alarm is generated when the actual proportion exceeds the value.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.24.2.1.3.1.29

hwIsisProcL2UpperRedistThreshold

Unsigned32

Read-create

This object indicates the proportion of the number of imported external routes in the total number of routes in the IS-IS Level-2 area. The value ranges from 0 to 100, and the default value is 90. An alarm is generated when the actual proportion exceeds the value.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

You can create entries in this table.

When creating a row, you need to specify hwIsisMTName. Note that hwIsisMTName cannot be base.

When creating an IPv4 multicast topology and an IPv6 multicast topology, set hwIsisMTName to multicast. Otherwise, the IPv4 multicast topology and the IPv6 multicast topology fail to be created.

Modification Restriction

When an IS-IS process is in the Disable state or the system is in the memory shortage, you cannot perform the Set operation on this table.

When the data of multiple entries is delivered in the same message block, if the data of one entry is incorrect, the data of the entire message block cannot be delivered to the IS-IS module.

When the Set operation is performed on hwIsisProcDefRoutAdvTag, the value ranges from 1 to 4294967295.

When the Get operation is performed on hwIsisProcDefRoutAdvTag, the value ranges from 0 to 4294967295. If no tag value is set, the obtained tag value is 0.

When the value of hwIsisProcDefRoutAdvTag is 0, the objects (including hwIsisProcDefRoutAdvPolicyName, hwIsisProcDefRoutAdvCost, hwIsisProcDefRoutAdvTag, hwIsisProcDefRoutAdvLevel, and hwIsisProcDefRoutAdvAvoidLearnEnabled) relevant to default routes will not be processed.

hwIsisProcDefRoutAdvAvoidLearnEnabled is used to configure avoid-learning; by default, it is configured as false. The value range of hwIsisProcL1CircuitCost varies with the cost-style of processes, and its maximum value is 16777215.

When the Set operation is performed on hwIsisProcpolicyName, the value ranges from 1 to 40.

When the Get operation is performed on hwIsisProcpolicyName, the value ranges from 0 to 40.

The value range and default value of hwIsisProcMaxLoadBalance is determined by the license file.

Although the value of hwIsisProcMaxLoadBalance ranges from 1 to 32, The default interval defined is 32.

By default, hwIsisProcSetOverLoad is not set. When the value of hwIsisProcSetOverLoad is disable(0), the data of related objects (including hwIsisProcSetOverLoadAllowRoute, hwIsisProcOnStartInterval, hwIsisProcOnStartStartFromPeer, hwIsisProcOnStartFromPeerInterval, and hwIsisProcOnStartWaitForBgpEnabled) will not be processed.

The value of hwIsisProcOnStartInterval ranges from 5 to 86400, and the default value is 600.

The value of hwIsisProcOnStartstartFromPeer ranges from 12 to 14.

The value of hwIsisProcOnStartstartFromPeerInterval ranges from 5 to 86400, and the default value is 1200.

Before setting the value of hwIsisProcOnStartstartFromPeerInterval, set the value of hwIsisProcOnStartstartFromPeer and then the value of hwIsisProcOnStartInterval. hwIsisProcOnStartstartFromPeerInterval is set only in the base topology.

Deletion Restriction

The entries in this table can be deleted.

When deleting an entry, reference the configured MT ID.

If hwIsisProcMTExtTable has the destroy value, only the destroy value is executed. In this case, other inputs are not processed or authenticated.

Access Restriction

When hwIsisProcDefRoutAdvType is not configured, its value is null(0); after it is configured, its default value is always(1).

hwIsisProcDefRoutAdvPolicyName can be set only when the value of hwIsisProcDefRoutAdvType is routepolicy(3).

When the Set operation is performed on hwIsisProcDefRoutAdvPolicyName, the value ranges from 1 to 40.

When the Get operation is performed on hwIsisProcDefRoutAdvPolicyName, the value ranges from 0 to 40.

The value range of hwIsisProcDefRoutAdvCost varies with the cost-style of processes and needs to conform with the value range specified by the command line.

If hwIsisProcDefRoutAdvCost is not set, the value obtained through the Get operation is 0.

When hwIsisProcDefRoutAdvLevel is not configured, its value is null(0). After it is configured, its default value is level2(2).

When the value of hwIsisProcSetOverLoad is set to disable (0) and the Get operation is performed on hwIsisProcOnStartInterval, the result of the Get operation is 0.

When hwIsisProcOnStartstartFromPeer is not set and the Get operation is performed on hwIsisProcOnStartstartFromPeer, the result of the Get operation is 0.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 510399

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next