No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwWlanApTypeGroupUpdateTable

hwWlanApTypeGroupUpdateTable

This table is used to map AP types and AP groups to upgrade file names. It allows you to upgrade APs in batches based on AP types and AP groups.

The indexes of this table are hwWlanApType and hwAPGroupName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.14.3.5.1.1

hwWlanApTypeGroupUpdateFilename

OCTET STRING(1–128)

read-write

This object indicates the name of the upgrade file matching the type of the APs ap group to be upgraded.

When configuration is created, hwWlanApTypeGroupUpdateFilename[1] must be used together with hwWlanApTypeGroupUpdateRowStatus; when configuration is modified, hwWlanApTypeGroupUpdateFilename[1] does not need to be used together with hwWlanApTypeGroupUpdateRowStatus.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.5.1.2

hwWlanApTypeGroupUpdateAdminOper

INTEGER{start(1),reset(2),cancel(3)}

read-write

This object indicates an upgrade operation.

  • start(1): The AP upgrade starts.
  • reset(2): After the upgrade is complete, the APs are restarted.
  • cancel(3): The upgrade is canceled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.5.1.3

hwWlanApTypeGroupUpdatePercent

Integer32

read-only

This object indicates the AP upgrade progress, namely, the percentage of upgraded APs to all APs of the same type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.5.1.4

hwWlanApTypeGroupUpdateRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

When configuration is created, hwWlanApTypeGroupUpdateRowStatus[4] must be used together with hwWlanApTypeGroupUpdateFilename.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

You can create entries in this table.

Modification Restriction

The entries in this table can be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 444021

Downloads: 46

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next