No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Relationships Between the hwTwampControllerSenderEnable and hwTwampSenderTable

Relationships Between the hwTwampControllerSenderEnable and hwTwampSenderTable

You can use the hwTwampControllerSenderEnable to enable the Control-Client, and use the hwTwampSenderTable to create test sessions based on different services and configure parameters for them.

hwTwampSenderId uniquely identifies a test session. The 5-tuple (hwTwampSenderLocalIpAddress, hwTwampSenderRemoteIpAddress, hwTwampSenderLocalUDPPort, hwTwampSenderRemoteUDPPort, and hwTwampSenderVrfName) of different test sessions must be different.

Figure 97-1  Relationships Between the hwTwampControllerSenderEnable and hwTwampSenderTable
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 512748

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next