No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwPimInterfaceElection

hwPimInterfaceElection

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.0.5

hwPimInterfaceElection

hwPimInterfaceAddressType

hwPimInterfaceAddress

hwPimInterfaceName

hwPimInstanceID

hwPimInstanceName

This alarm is generated in following conditions:
  • The PIM interface received a new Hello message and the DR priority or IP address of the PIM interface was greater than that of other interfaces in the shared network segment.

  • The PIM interface changes to the Up state but it does not receive any Hello message from other interfaces after the first Hello interval expires.

This object is implemented as defined in the corresponding MIB files.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 499313

Downloads: 48

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next