No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwSecurityProfileTable

hwSecurityProfileTable

The index of this table is hwSecurityProfileName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.22.1.1

hwSecurityProfileName

OCTET STRING(1–35)

read-write

This object indicates the name of a security profile. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.2

hwSecurityPolicy

INTEGER{wapiCert(1),wapiPsk(2),wpaDot1x(3),wpaPsk(4),wpa2Dot1x(5),wpa2Psk(6),wepShareKey(7),open(8),wpaWpa2Psk(9),wpaWpa2Dot1x(10),wepNoauth(11)}

read-write

This object indicates the air interface authentication policy. The default value is 6.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.3

hwSecurityWepEncrypt

Unsigned32(0–65535)

read-write

This object indicates four PSK encryption types. The value is 4 bits long. 1, 2, and 3 indicate encryption types wep(40), wep(104), and wep(128) respectively. The default value is 4369 (0x1111 in hexadecimal notation). For example:

  • If all the four WEP PSK encryption types are set to wep(128), the value of the object is 0x3333.
  • If only the encryption type of PSK1 is set to wep(128), the value of the object is 0x0003.
  • If only the encryption type of PSK4 is set to wep(40), the value of the object is 0x1000.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.4

hwSecurityWepPskMode

Unsigned32(0–65535)

read-write

This object indicates four WEP PSK modes. The value is 4 bits long. 1 and 2 indicate pskPassphase(1) and pskHex(2) respectively. The default value is 4369 (0x1111 in hexadecimal notation). For example:

  • If all the four WEP PSK modes are set to Hex, the value of the object is 0x2222.
  • If only the PSK mode of PSK1 is set to Hex, the value of the object is 0x0002.
  • If only the PSK mode of PSK4 is set to Passphase, the value of the object is 0x1000.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.5

hwSecurityWepPsk1

OCTET STRING(5–68)

read-write

This object indicates the WEP PSK1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.6

hwSecurityWepPsk2

OCTET STRING(5–68)

read-write

This object indicates the WEP PSK2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.7

hwSecurityWepPsk3

OCTET STRING(5–68)

read-write

This object indicates the WEP PSK3.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.8

hwSecurityWepPsk4

OCTET STRING(5–68)

read-write

This object indicates the WEP PSK4.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.9

hwSecurityWepDefaultKeyId

INTEGER(0–3)

read-write

This object indicates the default key ID for WEP. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.10

hwSecurityWpaEncrypt

INTEGER{unknown(0),wpaAes(1),wpaTkip(2),wpaAesTkip(3)}

read-write

This object indicates the WPA/WPA2 encryption algorithm. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.11

hwSecurityWpaPskMode

INTEGER{pskPassphase(1),pskHex(2)}

read-write

This object indicates whether the WPA PSK mode is PassPhase or Hex. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.12

hwSecurityWpaPsk

OCTET STRING(8–128)

read-write

This object indicates the WPA/WPA2 PSK.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.13

hwSecurityWpaPtkUpdateSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of WPA PTK update function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.14

hwSecurityWpaPtkUpdateInterval

Unsigned32(30–86400)

read-write

This object indicates the WPA PTK update interval. The default value is 43200 seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.15

hwSecurityWapiPskMode

INTEGER{pskPassphase(1),pskHex(2)}

read-write

This object indicates the WAPI PSK mode. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.16

hwSecurityWapiPsk

OCTET STRING(8–128)

read-write

This object indicates the WAPI PSK.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.17

hwSecurityWapiAsuIpAddress

IpAddress

read-write

The object indicates the IP address of the WAPI ASU.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.18

hwSecurityWapiIssuerCertFileName

OCTET STRING(0–255)

read-write

This object indicates the certificate file name of the WAPI issuer.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.19

hwSecurityWapiAsuCertFileName

OCTET STRING(0–255)

read-write

This object indicates the certificate file name of the WAPI ASU.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.20

hwSecurityWapiAcCertFileName

OCTET STRING(0–255)

read-write

This object indicates the certificate file name of the WAPI AC.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.21

hwSecurityWapiAcPrvKeyFileName

OCTET STRING(0–255)

read-write

This object indicates the private key file name of the WAPI AC.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.22

hwSecurityWapiIssuerPfxPassword

OCTET STRING(0–68)

read-write

This object indicates the WAPI issuer certificate key.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.23

hwSecurityWapiAsuPfxPassword

OCTET STRING(0–68)

read-write

This object indicates the WAPI ASU certificate key.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.24

hwSecurityWapiAcPfxPassword

OCTET STRING(0–68)

read-write

This object indicates the WAPI AC certificate key.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.25

hwSecurityWapiAcPrvKeyPassword

OCTET STRING(0–68)

read-write

This object indicates the key for reading the AC private key file.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.26

hwSecurityWapiCertRetransCount

Unsigned32(1–10)

read-write

This object indicates the number of retransmissions of WAPI certificate authentication packets. The default value is 3.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.27

hwSecurityWapiBkThreshold

Unsigned32(1–100)

read-write

This object indicates the WAPI BK lifetime percentage. The default value is 80.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.28

hwSecurityWapiBkLifetime

Unsigned32(600–604800)

read-write

This object indicates the interval for updating the WAPI BK. The default value is 10000 seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.29

hwSecurityWapiUskUpdateMethod

INTEGER{disabled(1), timeBased(2)}

read-write

This object indicates the WAPI USK update mode. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.30

hwSecurityWapiMskUpdateMethod

INTEGER{disabled(1), timeBased(2)}

read-write

This object indicates the WAPI MSK update mode. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.31

hwSecurityWapiUskUpdateInterval

Unsigned32(600–604800)

read-write

This object indicates the time-based interval for updating the WAPI USK. The default value is 86400 seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.33

hwSecurityWapiUskRetansCount

Unsigned32(1–10)

read-write

This object indicates the maximum number of retransmissions of a WAPI USK negotiation packet. The default value is 3.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.34

hwSecurityWapiMskUpdateInterval

Unsigned32(600–604800)

read-write

This object indicates the time-based interval for updating the WAPI MSK. The default value is 86400 seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.36

hwSecurityWapiMskRetansCount

Unsigned32(1–10)

read-write

This object indicates the maximum number of retransmissions of a WAPI MSK negotiation packet. The default value is 3.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.37

hwSecurityWapiSATimeout

Unsigned32(1–255)

read-write

This object indicates the timeout period of a WAPI-based security association (SA). The default value is 60 seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.39

hwSecurityProfileRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

hwSecurityWepEncrypt and hwSecurityWepPskMode must be both configured, and at least one of hwSecurityWepPsk1, hwSecurityWepPsk2, hwSecurityWepPsk3, and hwSecurityWepPsk4 must be configured.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 448484

Downloads: 46

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next