No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



Object Name

Binding Variable


Implemented Specifications


  • mplsL3VpnIfConfRowStatus
  • mplsL3VpnVrfOperStatus
This notification is generated when:
  • No interface is associated with this VRF, and the first (and only first) interface associated with it has its ifOperStatus change to up(1).
  • One interface is associated with this VRF, and the ifOperStatus of this interface changes to up(1).
  • Multiple interfaces are associated with this VRF, and the ifOperStatus of all interfaces is down(2), and the first of those interfaces has its ifOperStatus change to up(1).
  • The VPN instance is not bound to an interface or all the interfaces to which the VPN instance is bound are in the Down state, and the transit-vpn command is run in the VPN instance view or the BGP-VPN instance IPv4 address family view.

Currently, the binding variable is ifName.

Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 507803

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next