No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
adslAtucPerfDataTable

adslAtucPerfDataTable

This table provides one row for each ATUC. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94).

OID

Object Syntax Max Access Description Implemented Specifications

1.3.6.1.2.1.10.94.1.1.6.1.1

adslAtucPerfLofs Counter32 Read-only Number of Loss of Framing failures since agent reset. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.6.1.2

adslAtucPerfLoss Counter32 Read-only Number of Loss of Signal failures since agent reset. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.6.1.3

adslAtucPerfLols Counter32 Read-only Number of Loss of Link failures since agent reset. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.6.1.4

adslAtucPerfLprs Counter32 Read-only Number of Loss of Power failures since agent reset. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.6.1.5

adslAtucPerfESs Counter32 Read-only Number of Errored Seconds since agent reset. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.6.1.6

adslAtucPerfInits Counter32 Read-only Number of line initialization attempts since agent reset, including successful and failed attempts. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.6.1.7

adslAtucPerfValidIntervals INTEGER{0..96} Read-only Number of previous 15-minute intervals in the interval table for which data was collected. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.6.1.8

adslAtucPerfInvalidIntervals INTEGER{0..96} Read-only Number of intervals in the range from 0 to the value of adslAtucPerfValidIntervals for which no data is available. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.6.1.9

adslAtucPerfCurr15MinTimeElapsed AdslPerfTimeElapsed{0..899} Read-only Total elapsed seconds in this interval. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.6.1.10

adslAtucPerfCurr15MinLofs PerfCurrentCount Read-only Number of seconds in the current 15 minute interval when there was Loss of Framing. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.6.1.11

adslAtucPerfCurr15MinLoss PerfCurrentCount Read-only Number of seconds in the current 15 minute interval when there was Loss of Signal. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.6.1.12

adslAtucPerfCurr15MinLols PerfCurrentCount Read-only Number of seconds in the current 15 minute interval when there was Loss of Link. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.6.1.13

adslAtucPerfCurr15MinLprs PerfCurrentCount Read-only Number of seconds in the current 15 minute interval when there was Loss of Power. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.6.1.14

adslAtucPerfCurr15MinESs PerfCurrentCount Read-only Number of Errored Seconds in the current 15 minute interval. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.6.1.15

adslAtucPerfCurr15MinInits PerfCurrentCount Read-only Number of the line initialization attempts in the current 15 minute interval. Includes both successful and failed attempts. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.6.1.16

adslAtucPerfCurr1DayTimeElapsed AdslPerfTimeElapsed{0..86399} Read-only Number of seconds that have elapsed since the beginning of the current 1-day interval. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.6.1.17

adslAtucPerfCurr1DayLofs AdslPerfCurrDayCount Read-only Number of seconds when there was Loss of Framing during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.6.1.18

adslAtucPerfCurr1DayLoss AdslPerfCurrDayCount Read-only Number of seconds when there was Loss of Signal during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.6.1.19

adslAtucPerfCurr1DayLols AdslPerfCurrDayCount Read-only Number of seconds when there was Loss of Link during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.6.1.20

adslAtucPerfCurr1DayLprs AdslPerfCurrDayCount Read-only Number of seconds when there was Loss of Power during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.6.1.21

adslAtucPerfCurr1DayESs AdslPerfCurrDayCount Read-only Number of Errored Seconds during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.6.1.22

adslAtucPerfCurr1DayInits AdslPerfCurrDayCount Read-only Number of line initialization attempts in the day as measured by adslAtucPerfCurr1DayTimeElapsed. Includes both successful and failed attempts. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.6.1.23

adslAtucPerfPrev1DayMoniSecs INTEGER{0..86400} Read-only Amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.6.1.24

adslAtucPerfPrev1DayLofs AdslPerfPrevDayCount Read-only Number of seconds in the interval when there was Loss of Framing within the most recent previous 1-day period. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.6.1.25

adslAtucPerfPrev1DayLoss AdslPerfPrevDayCount Read-only Number of seconds in the interval when there was Loss of Signal within the most recent previous 1-day period. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.6.1.26

adslAtucPerfPrev1DayLols AdslPerfPrevDayCount Read-only Number of seconds in the interval when there was Loss of Link within the most recent previous 1-day period. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.6.1.27

adslAtucPerfPrev1DayLprs AdslPerfPrevDayCount Read-only Number of seconds in the interval when there was Loss of Power within the most recent previous 1-day period. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.6.1.28

adslAtucPerfPrev1DayESs AdslPerfPrevDayCount Read-only Number of Errored Seconds within the most recent previous 1-day period. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more LOS or sef defects. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.6.1.29

adslAtucPerfPrev1DayInits AdslPerfPrevDayCount Read-only Number of line initialization attempts in the most recent previous 1-day period. Includes both successful and failed attempts. This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

None.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

None.

Translation
Download
Updated: 2019-05-06

Document ID: EDOC1000174090

Views: 441909

Downloads: 46

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next