No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwWlanApTable

hwWlanApTable

This table is used to add, delete, modify, reset, or confirm APs. You can also use the table to query the configuration and restore factory settings of APs.

The index of this table is hwWlanApMac.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.3.3.1.1

hwWlanApMac

MacAddress

accessible-for-notify

This object indicates the MAC address of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.2

hwWlanApSn

OCTET STRING

read-only

This object indicates the sequence number (SN) of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.3

hwWlanApTypeInfo

OCTET STRING

read-only

This object indicates the AP type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.4

hwWlanApName

OCTET STRING

read-write

This object indicates the AP name.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.5

hwWlanApGroup

OCTET STRING

read-write

This object indicates the group to which an AP belongs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.6

hwWlanApRunState

INTEGER{idle(1),autofind(2),typeNotMatch(3),fault(4),config(5),configFailed(6),download(7),normal(8),committing(9),commitFailed(10),standby(11),verMismatch(12),nameConflicted(13),invalid(14)}

read-only

This object indicates the AP state.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.7

hwWlanApSoftwareVersion

OCTET STRING

read-only

This object indicates the AP software version.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.8

hwWlanApHardwareVersion

OCTET STRING

read-only

This object indicates the AP hardware version.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.9

hwWlanApCpuType

OCTET STRING

read-only

This object indicates the CPU type of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.10

hwWlanApCpufrequency

Integer32

read-only

This object indicates the CPU frequency of an AP.

Unit: MHz

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.11

hwWlanApMemoryType

OCTET STRING

read-only

This object indicates the memory type of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.12

hwWlanApDomain

OCTET STRING

read-only

This object indicates the AP domain.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.13

hwWlanApIpAddress

IpAddress

read-only

This object indicates the IP address of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.14

hwWlanApIpNetMask

IpAddress

read-only

This object indicates the IP address mask of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.15

hwWlanApGatewayIp

IpAddress

read-only

This object indicates the gateway IP address of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.16

hwWlanApMemorySize

Integer32

read-only

This object indicates the memory size of an AP.

Unit: MB

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.17

hwWlanApFlashSize

Integer32

read-only

This object indicates the flash memory size of an AP.

Unit: MB

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.18

hwWlanApRunTime

Unsigned32

read-only

This object indicates the running time of an AP.

Unit: tick

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.19

hwWlanApAdminOper

INTEGER{reset(1),confirm(2),manufacturerConfig(3)}

read-create

This object indicates administrative status of an AP.

Only the write operation is supported.

1.3.6.1.4.1.2011.6.139.13.3.3.1.20

hwWlanApDNS

IpAddress

read-only

This object indicates the AP DNS.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.21

hwWlanApOnlineTime

Unsigned32

read-only

This object indicates online duration of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.22

hwWlanApSysSoftwareDesc

OCTET STRING

read-only

This object indicates system software description of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.23

hwWlanApSysHardtwareDesc

OCTET STRING

read-only

This object indicates system hardware description of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.24

hwWlanApSysManufacture

OCTET STRING

read-only

This object indicates the manufacturer of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.25

hwWlanApSysSoftwareName

OCTET STRING

read-only

This object indicates software name of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.26

hwWlanApSysSoftwareVendor

OCTET STRING

read-only

This object indicates the manufacturer of the AP software.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.27

hwWlanApBomCode

OCTET STRING

read-only

This object indicates the BOM code.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.33

hwWlanApBootCountTotal

Integer32

read-only

This object indicates the total number of times an AP is restarted.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.34

hwWlanApBootCountPowerOff

Integer32

read-only

This object indicates the number of times an AP is restarted due to a power failure.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.35

hwWlanApBootCountClear

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object clears the AP restart count.

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

Only the write operation is supported.

1.3.6.1.4.1.2011.6.139.13.3.3.1.36

hwWlanApElectronicLabel

OCTET STRING(0–1025)

read-only

This object indicates the electronic label of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.37

hwWlanApWiredPortNum

Integer32

read-only

This object indicates the total number of wired interfaces.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.38

hwWlanApWiredPortMtu

Integer32

read-only

This object indicates the maximum transmit unit (MTU) of a wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.39

hwWlanApWiredPortMac

MacAddress

read-only

This object indicates the MAC address of a wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.40

hwWlanApMemoryUseRate

Integer32

read-only

This object indicates the memory usage.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.41

hwWlanApCpuUseRate

Integer32

read-only

This object indicates the CPU usage.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.43

hwWlanApTemperature

Integer32

read-only

This object indicates the operating temperature.

Unit: °C

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.44

hwWlanApOnlineUserNum

Integer32

read-only

This object indicates the number of online users.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.45

hwWlanApDualBandAssoc5gStaNum

Unsigned32

read-only

This object indicates the number of dual-band terminals that access the 5 GHz radio.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.46

hwWlanApDualBandStaNum

Unsigned32

read-only

This object indicates the number of STAs that support dual frequency bands.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.47

hwWlanApStaOnlineFailRatio

Unsigned32

read-only

This object indicates STA online failure ratio on an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.48

hwWlanApStaOfflineRatio

Unsigned32

read-only

This object indicates STA offline ratio of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.49

hwWlanApStickyClientRatio

Unsigned32

read-only

This object indicates the proportion of sticky STAs to all STAs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.50

hwWlanApUpEthPortSpeed

INTEGER{speed10(1),speed100(2),speed1000(3),speed10000(4)}

read-only

This object indicates the rate of an upstream Ethernet interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.51

hwWlanApUpEthPortSpeedMode

INTEGER{auto(1),forced(2)}

read-only

This object indicates the rate mode of an upstream Ethernet interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.52

hwWlanApUpEthPortDuplex

INTEGER{half(1),full(2)}

read-only

This object indicates the duplex state of an upstream Ethernet interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.53

hwWlanApUpEthPortDuplexMode

INTEGER{auto(1),forced(2)}

read-only

This object indicates the duplex mode of an upstream Ethernet interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.54

hwWlanApUpPortSpeed

Integer32

read-only

This object indicates the real-time rate of an upstream interface.

Unit: Mbps

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.55

hwWlanAPUpPortPER

Integer32

read-only

This object indicates the packet error rate of an upstream interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.56

hwWlanEthportUpRate

Integer32

read-only

This object indicates the upstream rate of an Ethernet interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.57

hwWlanEthportDownRate

Integer32

read-only

This object indicates the downstream rate of an Ethernet interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.58

hwWlanApAirportUpTraffic

OCTET STRING

read-only

This object indicates the traffic volume on an upstream wireless interface.

Unit: bytes. The value is reported in 64 bits.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.59

hwWlanApAirportDwTraffic

OCTET STRING

read-only

This object indicates the traffic volume on a downstream wireless interface.

Unit: bytes. The value is reported in 64 bits.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.60

hwWlanApEthportDwTraffic

OCTET STRING

read-only

This object indicates the traffic volume on a downstream wired interface.

Unit: bytes. The value is reported in 64 bits.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.61

hwWlanApEthportUpTraffic

OCTET STRING

read-only

This object indicates the traffic volume on an upstream wired interface.

Unit: bytes. The value is reported in 64 bits.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.62

hwWlanApUpPortRecvPackets

Counter64

read-only

This object indicates the total number of frames received on an upstream interface, which is extended to 64 bits.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.63

hwWlanApUpPortSendPackets

Counter64

read-only

This object indicates the total number of frames sent on an upstream interface, which is extended to 64 bits.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.64

hwWlanApRowstatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.65

hwWlanApUpPortRecvBytes

Counter64

read-only

This object indicates the total number of bytes received on an upstream interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.66

hwWlanApUpPortSendBytes

Counter64

read-only

This object indicates the total number of bytes sent on an upstream interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.67

hwWlanApId

Unsigned32

read-only

This object indicates the AP ID.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

When you import APs offline, you should configure hwWlanApRowstatus. You should select either hwWlanApName or hwWlanApGroup or both of them. hwWlanApSn is optional.

Modification Restriction

The entries in this table can be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read only when the corresponding AP exists.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 509051

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next