No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwIpMcastBoundaryTable

hwIpMcastBoundaryTable

This table is used to record information about multicast boundaries configured on the interface.

The indexes of this table are hwIpMcastBoundaryIfIndex, hwIpMcastBoundaryAddressType, hwIpMcastBoundaryAddress, and hwIpMcastBoundaryAddressPrefixLength.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.1.1.1.7.1.1

hwIpMcastBoundaryIfIndex

InterfaceIndex

Not-accessible

This object indicates the index of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.1.1.1.7.1.2

hwIpMcastBoundaryAddressType

InetAddressType

Not-accessible

This object indicates the address type of a multicast boundary.

The value can be IPv4 or IPv6.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.1.1.1.7.1.3

hwIpMcastBoundaryAddress

InetAddress

Not-accessible

This object indicates the address of a multicast boundary.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.1.1.1.7.1.4

hwIpMcastBoundaryAddressPrefixLength

InetAddressPrefixLength

Not-accessible

This object indicates the mask length of the address of a multicast boundary.

The value ranges from 4 to 128.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.1.1.1.7.1.5

hwIpMcastBoundaryTimeStamp

TimeStamp

Read-only

This object indicates the time when an interface is configured to be a boundary.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.1.1.1.7.1.6

hwIpMcastBoundaryDroppedMcastOctets

Counter64

read-only

The value of this object identifies the digits of multicast packets that have been dropped.

The value of this object is always 0.

The value of this object is always 0.

1.3.6.1.4.1.2011.5.25.149.1.1.1.7.1.7

hwIpMcastBoundaryDroppedMcastPkts

Counter64

read-only

The value of this object identifies the number of multicast packets that have been dropped.

The value of this object is always 0.

The value of this object is always 0.

1.3.6.1.4.1.2011.5.25.149.1.1.1.7.1.8

hwIpMcastBoundaryStatus

RowStatus

read-create

This object indicates whether a multicast boundary is enabled or disabled.

Currently, only active(1), createAndGo(4), and destroy(6) are supported.

1.3.6.1.4.1.2011.5.25.149.1.1.1.7.1.9

hwIpMcastBoundaryStorageType

StorageType

read-create

This object indicates the storage type.

The value of this object is always 3.

The maximum access is read-only;

The value of this object is always 3.

Creation Restriction

This table supports only CreateAndGo. You must set hwIpMcastBoundaryIfIndex, hwIpMcastBoundaryAddressType, hwIpMcastBoundaryAddress, and hwIpMcastBoundaryAddressPrefixLength together to succeed in creating a row.

When a row is created, a router will compare the set hwIpMcastBoundaryAddresstBoundaryAddress and hwIpMcastBoundaryAddressPrefixLength, reset the extra bits to be zero, and then save this address. For example, if the value of hwIpMcastBoundaryAddress is set to 10.1.1.1 and hwIpMcastBoundaryAddressPrefixLength is 8, hwIpMcastBoundaryAddress saved on the router should be 10.0.0.0.

Creating a record in which the mask length is relatively short will clear all the records in which the mask length of the addresses in the same network segment is longer. For example, the router has three records, 10.1.0.0/16, 10.2.0.0/16, and 10.3.0.0/16. At this time, adding a record 10.0.0.0/8 will clear all the previous three records.

In addition, as defined by the MIB, IPv6 supports hwIpMcastBoundaryAddressPrefixLength to be only 16.

Modification Restriction

None.

Deletion Restriction

This table supports only destroy. You must set hwIpMcastBoundaryIfIndex, hwIpMcastBoundaryAddressType, hwIpMcastBoundaryAddress, and hwIpMcastBoundaryAddressPrefixLength together to succeed in deleting a row.

Access Restriction

The entries in this table can be read only when multicast is enabled on the router and an IPv4 boundary or IPv6 boundary is configured on multicast interfaces.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 509649

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next