No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwLdpStaticFrrInterfaceTable

hwLdpStaticFrrInterfaceTable

This table is used to configure or delete static LDP FRR entries on the interface.

The indexes of this table are hwMplsInterfaceIndex and hwLdpStaticFrrPriority.

OID

Object Name

Syntax

Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.182.1.52.1.1

hwLdpStaticFrrPriority

Integer32 (1..65535)

Not-accessible

This object indicates the priority of a static FRR entry.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.52.1.11

hwLdpStaticFrrNextHop

IpAddress

Read-create

This object indicates the next hop of the static FRR.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.52.1.12

hwLdpStaticFrrIpPrefix

DisplayString

Read-create

This object indicates the IP prefix policy. The valid prefix length ranges from 1 to 169 characters. When the length is 0, it indicates that the policy is deleted.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.182.1.52.1.51

hwLdpStaticFrrInterfaceRowStatus

RowStatus

Read-create

This object indicates whether one entry is created or deleted in hwLdpStaticFrrInterfaceTable. The value of the object can be CreateAndGo or Destroy. When the value is set as CreateAndGo, and the entry is created, the status of the object is changed into active.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The creation of LDP FRR entries on the interface depends on whether the MPLS capability is configured rather than whether the LDP capability is enabled on the interface. However, LDP FRR entries take effect only after the LDP capability is enabled on the interface.

Modification Restriction

The configuration of the same valid index overwrites the previous one.

Deletion Restriction

None.

Access Restriction

None.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 481525

Downloads: 48

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next