No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
rcMplsTEExplicitRouteNameCfgTable

rcMplsTEExplicitRouteNameCfgTable

rcMplsTEExplicitRouteNameCfgTable is used to configure MPLS TE explicit path parameters.

The indexes of this table are rcMplsTEExplicitRouteNameCfgName and rcMplsTEExplicitRouteNameCfgIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.65000.1.5.1.1

rcMplsTEExplicitRouteNameCfgName

DisplayString

Not-accessible

This object indicates the name of a configured MPLS TE explicit path. This object is the first index of this table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.65000.1.5.1.2

rcMplsTEExplicitRouteNameCfgIndex

Unsigned32

Not-accessible

This object indicates the index of each next-hop IP address on an explicit path. This object is the second index in this table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.65000.1.5.1.3

rcMplsTEExplicitRouteNameCfgNextIP

IpAddress

Read-create

This object indicates a next-hop IP address configured on an explicit path.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.65000.1.5.1.4

rcMplsTEExplicitRouteNameCfgHopType

INTEGER{include(1),exclude(2)}

Read-create

The value of this object identifies whether an explicit path contains a node or not:

  • 1: include

  • 2: exclude

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.65000.1.5.1.5

rcMplsTEExplicitRouteNameCfgHopAttribute

INTEGER{strict(1),loose(2),interface(3),routerid(4)}

Read-create

The value of this object identifies the attribute of a node on an explicit path:

  • 1: strict

  • 2: loose

  • 3: An interface name identifies the node.

  • 4: An LSR ID identifies the node.

The value can only be 1 or 2.

1.3.6.1.4.1.65000.1.5.1.6

rcMplsTEExplicitRouteNameCfgRowSta

RowStatus

Read-create

This object is used to create, modify, or delete a row in this table.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

Before you create entries in this table, use rcMplsTEExplicitPathNameCfgTable to create an MPLS TE explicit path.

The rcMplsTEExplicitRouteNameCfgNextIP entry must be created when this table is created.

The rcMplsTEExplicitRouteNameCfgHopAttribute entry can only be created if the rcMplsTEExplicitRouteNameCfgHopType entry is created and its value is not 2 (exclude).

Modification Restriction

The rcMplsTEExplicitRouteNameCfgHopType entry cannot be modified dynamically. To modify it, delete and re-create it.

rcMplsTEExplicitRouteNameCfgHopAttribute must be modified together with rcMplsTEExplicitRouteNameCfgNextIP.

Deletion Restriction

None.

Access Restriction

None.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 444020

Downloads: 46

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next