No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
adslAturPhysTable

adslAturPhysTable

This table provides one row for each ATUR Each row contains the Physical Layer Parameters table for that ATUR. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94).

OID

Object Syntax Max Access Description Implemented Specifications

1.3.6.1.2.1.10.94.1.1.3.1.1

adslAturInvSerialNumber SnmpAdminString {SIZE (0..32)} Read-only The vendor specific string that identifies the vendor equipment. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.3.1.2

adslAturInvVendorID SnmpAdminString {SIZE (0..16)} Read-only The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.3.1.3

adslAturInvVersionNumber SnmpAdminString {SIZE (0..16)} Read-only The vendor specific version number sent by this ATU as part of the initialization messages. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.3.1.4

adslAturCurrSnrMgn INTEGER (-640..640) Read-only Noise Margin as seen by this ATU with respect to its received signal in tenth dB. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.3.1.5

adslAturCurrAtn Gauge32 (0..630) Read-only Measured difference in the total power transmitted by the peer ATU and the total power received by this ATU. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.3.1.6

adslAturCurrStatus BITS { noDefect(0),lossOfFraming(1),lossOfSignal(2),lossOfPower(3),lossOfSignalQuality(4) } Read-only Indicates Current State Of The Atur Line.
  • 0: noDefect
  • 1: lossOfFraming
  • 2: lossOfSignal
  • 3: lossOfPower
  • 4: lossOfSignalQuality
This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.3.1.7

adslAturCurrOutputPwr INTEGER {-310..310} Read-only Measured total output power transmitted by this ATU. This is the measurement that was reported during the last activation sequence. This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.94.1.1.3.1.8

adslAturCurrAttainableRate Gauge32 Read-only Indicates the maximum currently attainable data rate by the ATU. This value will be equal or greater than the current line rate. This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

None.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

None.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 499623

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next