No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwEntPbxStaticConflictTable

hwEntPbxStaticConflictTable

This table is used to modify and query the static conflicting services.

NOTE:

The PBX provides multiple services for users. Some services may conflict with each other in actual situations. You can define conflicting services in the MIB. When you configure the conflicting services, the system will display a message indicating that the services you want to configure conflict with each other.

The index of this table is hwEntPbxStaticConflictSrvIndex.

The table entry of this table is hwEntPbxStaticConflictEntry.

OID

Object Name

Data Type

Description

Maximum Access Permission

Status

1.3.6.1.4.1.2011.5.25.313.28.1.1

hwEntPbxStaticConflictSrvIndex

Integer32

This object indicates the indexes of parameters.

Value range: 0 to 255

  • 1: CLIP
  • 2: CLIR
  • 3: CFU
  • 4: CFB
  • 5: CFNA
  • 6: CFS
  • 7: CFO
  • 8: CW
  • 9: CALLLIMIT
  • 10: CALLTRANSFER
  • 11: CALLHOLD
  • 12: THREEPARTY
  • 13: CONF
  • l14: CALLINSERT
  • 15: CALLREDIAL
  • 16: QUERYDN
  • 17: DDS
  • 18: ABBDIAL
  • 19: WAKECALL
  • 20: ROMA
  • l21: PICKUPINGROUP
  • 22: PICKUPSPECIAL
  • 23: RINGSERVICE
  • 24: SCA
  • 25: RCS
  • 26: RAC
  • 27: DISCLIR
  • 28: ICS
  • 29: REMOTEOFFICE
  • 30: SCCCANCEL
  • 31: SCR
  • 32: PARK
  • 33: DLC
  • 34: CIPHERCALL
  • 35: CIPHERCALL_LIMIT
  • 36: CRBT
  • 37: CR
  • 38: OCM
  • 39: ICM
  • 40: CCBS
  • 41: CCNR
  • 42 to 255: reserved

not-accessible

current

1.3.6.1.4.1.2011.5.25.313.28.1.2

hwEntPbxStaticConflictNewService

BITS

This object indicates the conflicting service.

Value range: bit0 to bit63

The new service rights are as follows:

  • bit0: CLIP
  • bit1: CLIR
  • bit2: CFU
  • lbit3: CFB
  • bit4: CFNA
  • bit5: CFS
  • bit6: CFO
  • lbit7: CW
  • bit8: CALLLIMIT
  • bit9: CALLTRANSFER
  • bit10: CALLHOLD
  • bit11: THREEPARTY
  • bit12: CONF
  • bit13: CALLINSERT
  • bit14: CALLREDIAL
  • bit15: QUERYDN
  • bit16: DDS
  • bit17: ABBDIAL
  • bit18: WAKECALL
  • lbit19: ROMA
  • bit20: PICKUPINGROUP
  • bit21: PICKUPSPECIAL
  • bit22: RINGSERVICE
  • bit23: SCA
  • bit24: RCS
  • bit25: RAC
  • bit26: DISCLIR
  • bit27: ICS
  • bit28: REMOTEOFFICE
  • bit29: SCCCANCEL
  • bit30: SCR
  • bit31: PARK
  • bit32: DLC
  • bit33: CIPHERCALL
  • bit34: CIPHERCALL_LIMIT
  • bit35: CRBT
  • bit36: CR
  • bit37: OCM
  • bit38: ICM
  • bit39: CCBS
  • bit40: CCNR
  • bit41 to bit63: reserved

Default: 0

read-write

current

Creation Restriction

None.

Modification Restriction

If the value for a service is set to 0, the service is invalid.

If the value for a service is set to 1, the service is valid.

The service takes effect immediately after the configuration.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

None.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 484716

Downloads: 48

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next