No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwSepTopologyTable

hwSepTopologyTable

This table contains information about SEP segment topologies.

The indexes of this table are hwSepSegmentId are hwSepHop.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.223.1.3.1.1

hwSepHop

Integer (1..512)

Not-accessible

The value of this object identifies the number of hops from an interface to the primary edge interface.

If the value of hop on the primary edge interface is 1, the value of hop on the neighboring interface of the primary interface is 2. Each time a preemption packet destined for the secondary edge interface passes though an interface, the value of hop is increased by 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.223.1.3.1.2

hwSepPortId

OCTET STRING (SIZE (0..8))

Read-only

This object indicates the ID of an interface added to a SEP segment. The higher six bits indicate the MAC address of a device.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.223.1.3.1.3

hwSepTopoSysname

OCTET STRING (SIZE (0..20))

Read-only

This object indicates the system name.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.223.1.3.1.4

hwSepTopoPortname

OCTET STRING (SIZE (0..16))

Read-only

This object indicates the name of an interface added to a SEP segment.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.223.1.3.1.5

hwSepTopoPortConfigPriority

Integer (1..128)

Read-only

This object indicates the priority of an interface added to a SEP segment.

By default, the priority of an Ethernet interface in a specified SEP segment is 64.

The greater the priority value, the higher the priority. When a link fault is rectified, there is a high probability that an interface with the highest priority will be blocked.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.223.1.3.1.6

hwSepTopoPortActivePriority

Integer

Read-only

This object indicates the priority of an activate interface added to a SEP segment.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.223.1.3.1.7

hwSepTopoConfigPortRole

Integer

Read-only

The value of this object identifies the role of an interface in a SEP segment.
  • common (0x10): indicates that the role of an interface in a SEP segment is common interface.

  • edge secondary (0x21): indicates that the role of an interface in a SEP segment is secondary edge interface.

  • edge primary (0x22): indicates that the role of an interface in a SEP segment is primary edge interface.

  • no neighbor edge secondary (0x31): indicates that the role of an interface in a SEP segment is no-neighbor secondary edge interface.

  • no neighbor edge primary (0x32): indicates that the role of an interface in a SEP segment is no-neighbor primary edge interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.223.1.3.1.8

hwSepTopoActivePortRole

Integer

Read-only

The value of this object identifies the role of an active interface in a SEP segment.
  • common (0x10): indicates that the role of an active interface is common interface.

  • edge secondary (0x21): indicates that the role of an active interface is secondary edge interface.

  • edge primary (0x22): indicates that the role of an active interface is primary edge interface.

  • no neighbor edge secondary (0x31): indicates that the role of an active interface is no-neighbor secondary edge interface.

  • no neighbor edge primary (0x32): indicates that the role of an active interface is no-neighbor primary edge interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.223.1.3.1.9

hwSepTopoPortNbrState

INTEGER

{

down(1),

init(2),

preup(3),

up(4),

conflict(5)

}

Read-only

The value of this object identifies the neighbor negotiation status in a SEP segment.
  • down: indicates that an interface is in the Down state if it does not receive any Hello packet within a specified period.
  • init: indicates that the local interface receives a Hello packet.
  • preup: indicates that an interface is in the preup state.
  • up: indicates that neighbor negotiation is successful.
  • conflict: indicates that neighbor information constantly changes.

Currently, preup(3) is not supported.

1.3.6.1.4.1.2011.5.25.223.1.3.1.10

hwSepTopoBrotherPortId

OCTET STRING (SIZE (0..8))

Read-only

This object indicates that the ID of a brother interface of a specified interface. The higher six bits are the MAC address of a device.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.223.1.3.1.11

hwSepTopoNbrPortId

OCTET STRING (SIZE (0..8))

Read-only

This object indicates the ID of a neighboring interface of a specified interface. The higher six bits are the MAC address of a device.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.223.1.3.1.12

hwSepTopoPortLinkState

INTEGER

{

down(1)

up(2),

}

Read-only

This object indicates the status of an interface added to a SEP segment.
  • down: indicates that an interface is in the Down state.
  • up: indicates that an interface is in the Up state.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.223.1.3.1.13

hwSepTopoPortFwdState

INTEGER

{

discarding(1),

forwarding(2)

}

Read-only

This object indicates the status of an interface added to a SEP segment.
  • discarding: indicates that an interface is in the discarding state. An interface in this state sends and receives only SEP packets.
  • forwarding: indicates that an interface is in the forwarding state. An interface in this ate sends and receives both user traffic and SEP packets.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

Related SEP segments have been created.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 484723

Downloads: 48

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next