No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Functions Overview

Functions Overview

IF-MIB describes generic objects for network interface sub-layers. This MIB is an updated version of ifTable in MIB-II, and incorporates the extensions defined in RFC 1573.

IF-MIB contains a group of managed objects related to generic network interface(s) of a network device. These objects are generic in the sense that they apply to all network interfaces, regardless of the type of the communication media and protocols used on such interfaces. IF-MIB also defines objects which are specific to particular media and lower-level (sub-network layer and below) protocol stacks.

Network Management System (NMS) can query statistical information and set properties of the network by this MIB.

Root directory is as follows:


Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 515293

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next