No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwNatAddrPoolTable

hwNatAddrPoolTable

This table describes the NAT address pool.

The index of this table is hwNatAddrPoolIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.226.2.3.2.1.1

hwNatAddrPoolIndex

Unsigned32

read-create

This object indicates the index of the NAT address pool.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.226.2.3.2.1.2

hwNatAddrPoolStartAddr

IpAddress

read-create

This object indicates the start IP address of the NAT address pool.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.226.2.3.2.1.3

hwNatAddrPoolEndAddr

IpAddress

read-create

This object indicates the end IP address of the NAT address pool.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.226.2.3.2.1.4

hwNatAddrPoolRefTimes

Gauge32

read-create

This object indicates the number of times the NAT address pool is referenced.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.226.2.3.2.1.5

hwNatAddrPoolRefType

NATBindType

read-create

This object indicates the mode of referencing the NAT address pool.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

None.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

None.

Access Restriction

The entries in this table can be read only when an address pool is configured.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 507220

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next