No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ipv4InterfaceTable

ipv4InterfaceTable

This table is mainly used to display detailed IPv4 information on each interface.

The index of this table is ipv4InterfaceIfIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.4.28.1.1

ipv4InterfaceIfIndex

InterfaceIndex

Not-accessible

The index value that uniquely identifies the interface to which this entry is applicable.

The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.4.28.1.2

ipv4InterfaceReasmMaxSize

Integer32 (0..65535)

Read-only

The size of the largest IPv4 datagram that this entity can re-assemble from incoming IPv4 fragmented datagrams received on this interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.4.28.1.3

ipv4InterfaceEnableStatus

INTEGER {

up(1),

down(2)

}

Read-write

The indication of whether IPv4 is enabled (up) or disabled (down) on this interface.

This object does not affect the state of the interface itself, only its connection to an IPv4 stack. The IF-MIB should be used to control the state of the interface.

Currently, the maximum access is read-only.

1.3.6.1.2.1.4.28.1.4

ipv4InterfaceRetransmitTime

Unsigned32

Read-only

The time between retransmissions of ARP requests to a neighbor when resolving the address or when probing the reachability of a neighbor.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

ipv4InterfaceIfIndex of this table is the same as ifIndex of the IF-MIB.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 510704

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next