No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ospfv3AreaTable

ospfv3AreaTable

OSPFv3 Area Table contains information describing the configured parameters and cumulative statistics of the router's attached areas.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.191.1.2.1.1

ospfv3AreaId

Unsigned32 (0..4294967295)

Not-accessible

A 32-bit integer uniquely identifying an area. Area ID 0 is used for the OSPFv3 backbone.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.191.1.2.1.2

ospfv3AreaImportAsExtern

INTEGER{ importExternal(1), importNoExternal(2), importNssa(3) }

Read-create

Indicates whether an area is a Stub area, NSSA, or standard area. AS-scope LSAs are not imported into Stub Areas or NSSAs. NSSAs import AS-External data as NSSA LSAs which have Area-scope. DEFVAL { importExternal }.

Currently, the maximum access is read-only.

1.3.6.1.2.1.191.1.2.1.3

ospfv3AreaSpfRuns

Counter32

Read-only

The number of times that the intra-area route table has been calculated using this area's link state database. This is typically done using Dijkstra's algorithm.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.191.1.2.1.4

ospfv3AreaBdrRtrCount

Gauge32

Read-only

The total number of area border routers reachable within this area. This is initially zero, and is calculated in each SPF pass.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.191.1.2.1.5

ospfv3AreaAsBdrRtrCount

Gauge32

Read-only

The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.191.1.2.1.6

ospfv3AreaScopeLsaCount

Gauge32

Read-only

The total number of Area-Scope link state advertisements in this area's link state database.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.191.1.2.1.7

ospfv3AreaScopeLsaCksumSum

Unsigned32

Read-only

The 32-bit unsigned sum of the Area-Scope link state advertisements' LS checksums contained in this area's link state database. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.191.1.2.1.8

ospfv3AreaSummary

INTEGER { noAreaSummary(1), sendAreaSummary(2) }

Read-create

The variable ospfv3AreaSummary controls the import of Inter-Area LSAs into stub and NSSA areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate Inter-Area LSAs into the stub or NSSA area. It will rely entirely on its default route. If it is sendAreaSummary, the router will both summarize and propagate Inter-Area LSAs. DEFVAL { sendAreaSummary }.

Currently, the maximum access is read-only.

1.3.6.1.2.1.191.1.2.1.9

ospfv3AreaRowStatus

INTEGER { active, 1 } ,{ notInService, 2 } ,{ notReady, 3 } ,{ createAndGo, 4 } ,{ createAndWait, 5 } ,{ destroy, 6 }

Read-create

This object permits management of the table facilitating actions such as row creation, construction and destruction.

Currently, the maximum access is read-only.

1.3.6.1.2.1.191.1.2.1.10

ospfv3AreaStubMetric

Integer32

Read-create

The metric value advertised for the default route into Stub and NSSA areas.

Currently, the maximum access is read-only.

1.3.6.1.2.1.191.1.2.1.11

ospfv3AreaNssaTranslatorRole

INTEGER { always(1), candidate(2) }

Read-create

The value of this object indicates the NSSA translator role for this NSSA area.

Currently, the maximum access is read-only.

1.3.6.1.2.1.191.1.2.1.12

ospfv3AreaNssaTranslatorState

INTEGER { enabled(1), elected(2), disabled(3) }

Read-only

The value of this object indicates the current status of the NSSA translator for this NSSA area.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.191.1.2.1.13

ospfv3AreaNssaTranslatorStabInterval

Unsigned32

Read-create

This object indicates the NSSA translator stability interval for the NSSA area.

Currently, the maximum access is read-only.

1.3.6.1.2.1.191.1.2.1.14

ospfv3AreaNssaTranslatorEvents

Counter32

Read-only

This object indicates the NSSA translator events.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.191.1.2.1.15

ospfv3AreaStubMetricType

INTEGER { ospfv3Metric(1), comparableCost(2), nonComparable(3) }

Read-create

This variable assigns the type of metric advertised as a default route.

Currently, the maximum access is read-only.

1.3.6.1.2.1.191.1.2.1.16

ospfv3AreaTEEnabled

TruthValue

Read-create

Indicates whether or not traffic engineering is enabled in the area. The object is set to the value true (1) to enable traffic engineering. Traffic engineering is disabled by default.

Currently, the maximum access is read-only; the return value 2 is supported only.

Creation Restriction

The entries in this table cannot be created.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

Before reading this MIB table, run the ospfv3 mib-binding process-id command to bind the OSPFv3 process to SNMP.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 483347

Downloads: 48

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next