No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwWlanApUpdateTable

hwWlanApUpdateTable

This table maps AP types to upgrade file names. It allows you to upgrade APs in batches based on AP types.

The index of this table is hwWlanApType.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.14.3.2.1.1

hwWlanApUpdateFilename

OCTET STRING

read-create

This object indicates the name of the upgrade file matching the type of the APs to be upgraded.

When configuration is created, hwWlanApUpdateFilename[1] must be used together with hwWlanApUpdateRowStatus; when configuration is modified, hwWlanApUpdateFilename[1] does not need to be used together with hwWlanApUpdateRowStatus.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.2.1.2

hwWlanApUpdateAdminOper

INTEGER{start(1),reset(2),cancel(3)}

read-create

This object indicates that the APs begin to upgrade.

  • start(1): The AP upgrade starts.
  • reset(2): After the upgrade is complete, the APs are restarted.
  • cancel(3): The upgrade is canceled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.2.1.3

hwWlanApUpdatePercent

Integer32

read-only

This object indicates the AP upgrade progress, namely, the percentage of upgraded APs to all APs of the same type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.14.3.2.1.4

hwWlanApUpdateRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

You can create entries in this table.

Modification Restriction

The entries in this table can be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 452998

Downloads: 48

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next