No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ospfv3AreaLsdbTable

ospfv3AreaLsdbTable

OSPFv3 Area-Scope Link State Database contains the Area-Scope Link State Advertisements from the areas that the router is attached to.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.191.1.4.1.1

ospfv3AreaLsdbAreaId

Unsigned32 (0..4294967295)

Not-accessible

The 32-bit identifier of the Area from which the LSA was received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.191.1.4.1.2

ospfv3AreaLsdbType

Unsigned32 (0..4294967295)

Not-accessible

The type of the link state advertisement. Each link state type has a separate advertisement format. Area-Scope LSAs not recognized by the router may be stored in the database.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.191.1.4.1.3

ospfv3AreaLsdbRouterId

Unsigned32 (0..4294967295)

Not-accessible

The 32 bit number that uniquely identifies the originating router in the Autonomous System.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.191.1.4.1.4

ospfv3AreaLsdbLsid

Unsigned32

Not-accessible

The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressing semantics.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.191.1.4.1.5

ospfv3AreaLsdbSequence

Integer32

Read-only

The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.191.1.4.1.6

ospfv3AreaLsdbAge

Unsigned32

Read-only

This field is the age of the link state advertisement in seconds.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.191.1.4.1.7

ospfv3AreaLsdbChecksum

Integer32

Read-only

This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.191.1.4.1.8

ospfv3AreaLsdbAdvertisement

OCTET STRING (SIZE (1..65535))

Read-only

The entire Link State Advertisement, including its header.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.191.1.4.1.9

ospfv3AreaLsdbTypeKnown

TruthValue

Read-only

Indicates whether the LSA type is recognized by this Router.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The entries in this table cannot be created.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

Before reading this MIB table, run the ospfv3 mib-binding process-id command to bind the OSPFv3 process to SNMP.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 500566

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next