No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwBundleSerialTable

hwBundleSerialTable

hwBundleSerialIfIndex, which is set when this table is created and cannot be modified, uniquely identifies this table. This table describes attributes of the serial interfaces to which timeslots are bound.

The index of this table is hwBundleSerialIfIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.157.1.7.1.1.11

hwBundleSerialLinkProtocol

INTEGER

{ietf(1),nonstandard(2),hdlc(3),ppp(4),lapb(5),atm(6),tdm(7),none(255)}

Read-write

The value of this object identifies the type of an encapsulation protocol.

By default, the type of the encapsulated protocol is PPP.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

On the AR, the value of hwBundleSerialLinkProtocol can be set to either ietf or non-ietf on the serial interface of LPUD and LPUF. The serial interfaces on other LPUs, however, cannot be enabled with FR (in IETF or non-IETF mode) encapsulation. That is, hwBundleSerialLinkProtocol cannot be set to ietf or non-ietf on other LPUs. In addition, at present, hwBundleSerialLinkProtocol cannot be set to lapb.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 484729

Downloads: 48

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next