No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ipv6AddrPrefixTable

ipv6AddrPrefixTable

This table is used to describe information about the address prefix of an IPv6 interface.

The indexes of this table are ipv6IfIndex, ipv6AddrPrefix, and ipv6AddrPrefixLength.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.55.1.7.1.1

ipv6AddrPrefix

Ipv6AddressPrefix

Not-accessible

The prefix associated with the interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.55.1.7.1.2

ipv6AddrPrefixLength

INTEGER (0..128)

Not-accessible

The value of this object identifies the length of the address prefix of the interface, in bits.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.55.1.7.1.3

ipv6AddrPrefixOnLinkFlag

TruthValue

Read-only

This object has the value 'true(1)', if this prefix can be used for on-link determination and the value 'false(2)' otherwise.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.55.1.7.1.4

ipv6AddrPrefixAutonomousFlag

TruthValue

Read-only

Autonomous address configuration flag.

The values are as follows:

  • true(1): This prefix can be used for autonomous address configuration (that can be used to form a local interface address).
  • false(2): It is not used to autoconfigure a local interface address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.55.1.7.1.5

ipv6AddrPrefixAdvPreferredLifetime

Unsigned32

Read-only

It is the length of time in seconds that this prefix will remain preferred, that is time until deprecation.

A value of 4294967295 represents infinity.

The address generated from a deprecated prefix should no longer be used as a source address in new communications, but packets received on such an interface are processed as expected.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.55.1.7.1.6

ipv6AddrPrefixAdvValidLifetime

Unsigned32

Read-only

It is the length of time in seconds that this prefix will remain valid, that is time until invalidation.

A value of 4294967295 represents infinity.

The address generated from an invalidated prefix should not appear as the destination or source address of a packet.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The interface supports the IPv6 function.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 483691

Downloads: 48

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next