No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwRsvpTeIfTable

hwRsvpTeIfTable

The RSVP-specific attributes of the system's interfaces.

The index of the table is ifIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.148.1.5.1.1

hwRsvpTeIfUdpNbrs

Gauge32

Read-only

The number of neighbors perceived to be using only the RSVP UDP Encapsulation.

The value is always set as 0.

1.3.6.1.4.1.2011.5.25.148.1.5.1.2

hwRsvpTeIfIpNbrs

Gauge32

Read-only

The number of neighbors perceived to be using only the RSVP IP Encapsulation.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.3

hwRsvpTeIfNbrs

Gauge32

Read-only

The number of neighbors currently perceived; this will exceed hwRsvpTeIfIpNbrs + hwRsvpTeIfUdpNbrs by the number of neighbors using both encapsulations.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.4

hwRsvpTeIfRefreshBlockadeMultiple

Integer32

Read-only

The value of the RSVP value 'Kb', Which is the minimum number of refresh intervals that blockade state will last once entered.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.5

hwRsvpTeIfRefreshMultiple

Integer32

Read-only

The value of the RSVP value 'K', which is the number of refresh intervals which must elapse (minimum) before a PATH or RESV message which is not being refreshed will be aged out.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.6

hwRsvpTeIfTtl

Integer32

Read-only

The value of SEND_TTL used on this interface for messages this node originates. If set to zero, the node determines the TTL via other means.

The value is always set as 16.

1.3.6.1.4.1.2011.5.25.148.1.5.1.7

hwRsvpTeIfRefreshInterval

TimeInterval

Read-only

The value of the RSVP value 'R', which is the minimum period between refresh transmissions of a given PATH or RESV message on an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.8

hwRsvpTeIfRouteDelay

TimeInterval

Read-only

The approximate period from the time a route is changed to the time a resulting message appears on the interface.

The value is always set as 200.

1.3.6.1.4.1.2011.5.25.148.1.5.1.9

hwRsvpTeIfEnabled

TruthValue

Read-only

Its value is always TRUE, if RSVP is enabled on this Interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.10

hwRsvpTeIfUdpRequired

TruthValue

Read-only

If TRUE, manual configuration forces the use of UDP encapsulation on the interface. If FALSE, UDP encapsulation is only used if hwRsvpTeIfUdpNbrs is not zero.

The value is always set as false.

1.3.6.1.4.1.2011.5.25.148.1.5.1.11

hwRsvpTeIfStatus

RowStatus

Read-only

'Active' on interfaces that are configured for RSVP.

The value is always set as 1.

1.3.6.1.4.1.2011.5.25.148.1.5.1.12

hwRsvpTeIfHelloEnabled

TruthValue

Read-only

If TRUE, RSVPTE hello is enabled on this Interface. If FALSE, RSVPTE is not enabled on this interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.13

hwRsvpTeIfSrefreshEnabled

TruthValue

Read-only

If TRUE, Srefresh is enabled on this interface. If FALSE, Srefresh is not enabled on this interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.14

hwRsvpTeIfSrefreshInterval

TimeInterval

Read-only

Interval between two updates.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.15

hwRsvpTeIfRetranIncDelta

Integer32

Read-only

Delta governs the speed with which the sender increases the retransmission interval. The ratio of two successive retransmission intervals is (1 + Delta).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.16

hwRsvpTeIfRetranInterval

TimeInterval

Read-only

The retransmission interval.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.17

hwRsvpTeIfAuthEnabled

TruthValue

Read-only

If TRUE, Authentication is enabled on this Interface. If FALSE, Authentication is not enabled on this interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.18

hwRsvpTeIfAuthEncrypted

TruthValue

Read-only

This states that Authentication key is encrypted or not.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.19

hwRsvpTeIfAuthHandshake

TruthValue

Read-only

Handshaking is enabled authentications.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.20

hwRsvpTeIfAuthLifeTime

TimeInterval

Read-only

Authentication life time.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.21

hwRsvpTeIfAuthKey

OCTET STRING (SIZE (0..392))

Read-only

Authentication key, used for authentication processing. For security purposes, a get on this returns a zero length string.

Currently, the value range of 1 to 64 is supported.

1.3.6.1.4.1.2011.5.25.148.1.5.1.22

hwRsvpTeIfWindowSize

Integer32

Read-only

Administrators can specify a message window corresponding to the worst case reordering behavior. For example, one might specify that packets reordered within a 32 message window would be accepted. If no reordering can occur, the window is set to one. The maximum value is 64.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

This table cannot be created.

Modification Restriction

This table cannot be modified.

Deletion Restriction

This table cannot be deleted.

Access Restriction

To access this table, RSVP-TE must be enabled.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 481757

Downloads: 48

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next