No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dot1dStpPortTable

dot1dStpPortTable

This table describes the attributes of ports on the devices running STP.

The index of this table is dot1dStpPort.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.17.2.15.1.1

dot1dStpPort

Integer32 (1..65535)

Read-only

The value of this object identifies the port number.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.17.2.15.1.2

dot1dStpPortPriority

Integer32 (0..255)

Read-write

The value of this object identifies the priority of a port.

The priority of a port determines whether the port can be a root port. In the spanning tree algorithm, in the case of equal conditions, the port with a higher priority is selected to be a root port.

The value of the priority is contained in the first byte of the port ID in the network byte order. The rest bytes of the port ID is the number of the STP port.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.17.2.15.1.3

dot1dStpPortState

INTEGER {

disabled(1),

blocking(2),

listening(3),

learning(4),

forwarding(5),

broken(6)

}

Read-only

The value of this object identifies the current status of a port.

If the device detects a port that is faulty, it places the port into the broken state. For ports that are disabled, the object has a value of disabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.17.2.15.1.4

dot1dStpPortEnable

INTEGER {

enabled(1),

disabled(2)

}

Read-write

The enabled/disabled status of the port.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.17.2.15.1.5

dot1dStpPortPathCost

Integer32 (1..65535)

Read-write

The value of this object identifies the path cost of the port.

By default, the path cost of a port is determined by the transmission rate on the link connecting the bridge to the port.
  • Huawei legacy standard: 1 to 200000
  • IEEE 802.1D standard: 1 to 65535
  • IEEE 802.1t standard: 1 to 200000000

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.17.2.15.1.6

dot1dStpPortDesignatedRoot

BridgeId

Read-only

This object indicates the root bridge.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.17.2.15.1.7

dot1dStpPortDesignatedCost

Integer32

Read-only

The value of this object identifies the cost of the path from the designated port to the root bridge.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.17.2.15.1.8

dot1dStpPortDesignatedBridge

BridgeId

Read-only

This object indicates the designated bridge of the port.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.17.2.15.1.9

dot1dStpPortDesignatedPort

OCTET STRING(SIZE(2))

Read-only

This object indicates the designated port of the device.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.17.2.15.1.10

dot1dStpPortForwardTransitions

Counter32

Read-only

This object indicates the number of times the port transitions from the Learning state to the Forwarding state.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.17.2.15.1.11

dot1dStpPortPathCost32 Integer32 (1..200000000)

Read-write

The value of this object identifies the path cost of the port.

By default, the path cost of a port is determined by the transmission rate on the link connecting the bridge to the port.
  • Huawei legacy standard: 1 to 200000
  • IEEE 802.1D standard: 1 to 65535
  • IEEE 802.1t standard: 1 to 200000000

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

This table cannot be created.

Modification Restriction

The entries in this table can be modified.

Deletion Restriction

This table cannot be deleted.

Access Restriction

The table has records only when the Layer 2 ports exist.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 499537

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next