No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwVrrpTrackNQATable

hwVrrpTrackNQATable

This table is used to configure a VRRP backup group to track an NQA test instance.

The indexes of this table are as follows:

  • hwVrrpTrackNQAVRID

  • hwVrrpTrackNQAStandbyIfIndex

  • hwVrrpTrackNQAAdminName

  • hwVrrpTrackNQATestName

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.127.2.12.1.1

hwVrrpTrackNQAVRID

VrId

Not-accessible

The object indicates the ID of the VRRP backup group. The value ranges from 1 to 255.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.127.2.12.1.2

hwVrrpTrackNQAStandbyIfIndex

InterfaceIndex

Not-accessible

This object indicates the index of an interface where the VRRP backup group resides. An interface index and a VRID together identify a VRRP backup group.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.127.2.12.1.3

hwVrrpTrackNQAAdminName

DisplayString (SIZE (1..32))

Not-accessible

The value of this object identifies the name of a management NQA test instance that a VRRP backup group tracks.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.127.2.12.1.4

hwVrrpTrackNQATestName

DisplayString (SIZE (1..32))

Not-accessible

The value of this object identifies the name of an NQA test instance that a VRRP backup group tracks.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.127.2.12.1.5

hwVrrpTrackNQAPriReduce

Integer32 (0..255)

Read-create

The value of this object identifies a value by which the VRRP priority value decreases after the tracked NQA instance goes Down.

The value is an integer that can be 0 or 1 to 255.

  • 0: used when a VRRP backup group is not configured to track an NQA test instance.
  • 1 to 255: values can be set.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.127.2.12.1.6

hwVrrpTrackNQAOperRowStatus

RowStatus

Read-create

The object indicates the status of the row.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

hwVrrpTrackNQAVRID must be an existing value of vrrpOperVrId in VrrpOperEntry of VRRP-MIB.

The VRRP backup group cannot be an IP address owner or increase VRRP priority values of devices to perform a master/backup switchover when the non-preemption mode is used.

The NQA test instance must be an ICMP test instance.

Modification Restriction

The entries in this table can be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 451128

Downloads: 46

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next