No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Functions Overview

Functions Overview

Huawei defines HUAWEI-L2VLAN-MIB. This MIB is used to set the information such as the basic information of the VLAN and the relationship between the VLAN and ports. This MIB supports the following functions:

  • Querying the status of the VLAN

  • Encapsulating with the layer 2 tag on the QinQ port

  • Setting and modifying VLAN replacement

  • Setting and modifying the super-VLAN

  • Setting port isolation

The OID of root objects is:



The dynamic VLAN does not support the operation by using a MIB.

Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 507689

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next