No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwDHCPSInterfacePoolStaticBindTable

hwDHCPSInterfacePoolStaticBindTable

This table describes static bindings in an interface address pool on a DHCP server.

The indexes of this table are ifIndex and hwDHCPSInterfacePoolStaticBindIP.

OID

Object

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.7.2.1.8.1.1

hwDHCPSInterfacePoolStaticBindIP

IpAddress

Read-only

This object indicates the IP addresses statically bound in an interface address pool.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.8.1.2

hwDHCPSInterfacePoolStaticBindMac

MacAddress

Read-create

This object indicates the hardware addresses statically bound in an interface address pool.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.7.2.1.8.1.3

hwDHCPSInterfacePoolStaticBindRowStatus

RowStatus

Read-create

This object indicates the status of rows in this table.

Currently, only three actions are used: active(1), createAndGo(4), destroy(6).

When configuring static bindings, you must specify IP addresses and hardware addresses.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The IP address statically bound in an interface address pool must be within the address pool range. Therefore, the NMS needs to read the IP address and mask of an interface and displays them on the configuration interface to guide user configuration.

Modification Restriction

The entries in this table cannot be modified. You can only create or delete the static IP addresses.

Deletion Restriction

None.

Access Restriction

None.

Translation
Download
Updated: 2019-07-19

Document ID: EDOC1000174090

Views: 505790

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next