No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009 CLI-based Configuration Guide - Ethernet Switching

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Disabling a Bridge Group from Bridging Specified Protocol Packets

(Optional) Disabling a Bridge Group from Bridging Specified Protocol Packets

Context

To allow a bridge group to forward specified protocol packets, enable the function that bridges the protocol packets on the bridge group. If a bridge group is disabled from bridging specified protocol packets, the bridge group will discard the protocol packets.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run bridge bridge-id

    The bridge group view is displayed.

  3. Run bridging { ip | others } disable

    The bridge group is disabled from bridging specified protocol packets.

    By default, a bridge group bridges all protocol packets.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174108

Views: 62661

Downloads: 51

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next