No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009 CLI-based Configuration Guide - Ethernet Switching

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Is the Function of the LACP Preemption Delay?

What Is the Function of the LACP Preemption Delay?

When an Eth-Trunk in LACP mode goes Up and Down frequently due to unstable physical links, LACP flaps. As a result, services transmitted on the Eth-Trunk link are affected. After the LACP preemption delay is set, LACP negotiation is not performed during the delay. The possibility of LACP flapping is reduced, and services will not be affected.

You can run the lacp preempt enable command in the interface view to enable LACP preemption on the Eth-Trunk and run the lacp preempt delay delay-time command to set the LACP preemption delay.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174108

Views: 54989

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next