No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009 CLI-based Configuration Guide - Ethernet Switching

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Group VLAN for a Subordinate VLAN

Configuring a Group VLAN for a Subordinate VLAN


A VLAN associated with a group interface is called a group VLAN. Group interfaces in a group VLAN can communicate with each other.


  1. Run system-view

    The system view is displayed.

  2. Run vlan batch vlan-id1 [ to vlan-id2 ] &<1-10>

    A VLAN to be configured as a subordinate group VLAN is created.

  3. Run vlan vlan-id

    The view of a created principal VLAN is displayed.

  4. Run subordinate group { vlan-id1 [ to vlan-id2 ] } &<1-10>

    The VLAN is configured as a subordinate group VLAN.

    Ensure that the VLAN has been created.

    A principal VLAN can be configured with a maximum of 128 subordinate group VLANs.

    The VLAN ID assigned to a subordinate group VLAN cannot be used to configure a VLANIF interface, VLAN mapping, VLAN stacking, super-VLAN, or sub-VLAN.

Updated: 2019-05-17

Document ID: EDOC1000174108

Views: 62378

Downloads: 50

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next