No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009 CLI-based Configuration Guide - Ethernet Switching

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the MUX VLAN Function on an Interface

Enabling the MUX VLAN Function on an Interface

Context

After the MUX VLAN function is enabled on an interface, the principal VLAN and subordinate VLAN can communicate with each other; interfaces in a group VLAN can communicate with each other; interfaces in a separate VLAN cannot communicate with each other.

Pre-configuration Tasks

Before enable MUX VLAN function, complete the following task:
  • The port has been added to only a VLAN. If the port has been added to multiple VLANs, the MUX VLAN function cannot be enabled on this port.

  • The port has been added to a principal or subordinate VLAN in untagged mode as an access or hybrid interface.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run port mux-vlan enable

    The MUX VLAN function is enabled.

    NOTE:
    • Disabling MAC address learning or limiting the number of learned MAC addresses on an interface will compromise the performance of the MUX VLAN function.

    • MUX VLAN and port security cannot be configured on the same interface.

    • MUX VLAN and MAC address authentication cannot be configured on the same interface.

    • MUX VLAN and 802.1x authentication cannot be configured on the same interface.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174108

Views: 56685

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next