No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009 CLI-based Configuration Guide - Ethernet Switching

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Separate VLAN for a Subordinate VLAN

Configuring a Separate VLAN for a Subordinate VLAN


A VLAN associated with separate interfaces is called a separate VLAN. Interfaces in a separate VLAN cannot communicate with each other.


  1. Run system-view

    The system view is displayed.

  2. Run vlan batch vlan-id

    A VLAN to be configured as a subordinate separate VLAN is created.

  3. Run vlan vlan-id

    The view of a created principal VLAN is displayed.

  4. Run subordinate separate vlan-id

    The VLAN is configured as a subordinate separate VLAN.

    Ensure that the VLAN has been created.

    A principal VLAN can be configured with only one subordinate separate VLAN.

    The subordinate group VLAN and subordinate separate VLAN of the same MUX VLAN must be unique.

    The VLAN ID assigned to a subordinate separate VLAN cannot be used to configure a VLANIF interface, VLAN mapping, VLAN stacking, super-VLAN, or sub-VLAN.

Updated: 2019-05-17

Document ID: EDOC1000174108

Views: 56125

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next