No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009 CLI-based Configuration Guide - Ethernet Switching

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a QinQ Sub-interface

Configuring a QinQ Sub-interface


When a VPN network connects to an ISP network through a sub-interface, the sub-interface needs to terminate VLAN tags. When data packets sent by CEs to PEs carry double VLAN tags, the sub-interface terminates double VLAN tags. This sub-interface is called QinQ termination sub-interface.


  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number.subinterface-number

    The view of the sub-interface connecting the PE to the CE is displayed.

  3. Run qinq termination pe-vid pe-vid ce-vid ce-vid1 [ to ce-vid2 ]

    QinQ termination is configured on the sub-interface.

Updated: 2019-05-17

Document ID: EDOC1000174108

Views: 62026

Downloads: 46

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next