No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009 CLI-based Configuration Guide - Ethernet Switching

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the Digest Snooping Function

Enabling the Digest Snooping Function

Context

Interconnected Huawei and non-Huawei devices cannot communicate with each other if they have the same region name, revision number, and VLAN-to-instance mappings but different BPDU keys. To address this problem, enable the digest snooping function on the Huawei device.

Perform the following steps on a switching device in an MST region to enable the digest snooping function.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The Ethernet interface view is displayed.

  3. Run stp config-digest-snoop

    The digest snooping function is enabled.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174108

Views: 56090

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next