No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009 CLI-based Configuration Guide - Ethernet Switching

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Can an Eth-Trunk Be Configured with an IP Address?

Can an Eth-Trunk Be Configured with an IP Address?

By default, an Eth-Trunk is a Layer 2 interface and cannot be configured with an IP address. You can configure an IP address for the Eth-Trunk that has been switched to a Layer 3 interface using the undo portswitch command.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174108

Views: 55529

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next