No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009 CLI-based Configuration Guide - Ethernet Switching

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Summary of VLAN Termination Configuration Tasks

Summary of VLAN Termination Configuration Tasks

Table 6-1 describes the VLAN termination configuration tasks. The configuration tasks can be performed in any sequence.

Table 6-1  VLAN termination configuration tasks
Configuration Task Applicable Scenario

Configuring a Dot1q Termination Sub-interface to Implement Inter-VLAN Communication

A router connects to user hosts residing in different VLANs through a Layer 3 Ethernet interface, and these user hosts need to communicate with each other.

Configuring a Dot1q Termination Sub-interface and Connecting It to an L2VPN

A carrier's network provides the L2VPN service for users. PEs function as user access devices and connect to CEs through sub-interfaces to access user networks. The data packets that CEs send to PEs carry one VLAN tag. Interworking is required between user networks.

Configuring a Dot1q Termination Sub-interface and Connecting It to an L3VPN

A carrier's network provides the L3VPN service for users. PEs function as user access devices and connect to CEs through sub-interfaces to access user networks. The data packets that CEs send to PEs carry one VLAN tag. Interworking is required between user networks.

Configuring a QinQ Termination Sub-interface and Connecting It to an L2VPN

A carrier's network provides the L2VPN service for users. PEs function as user access devices and connect to CEs through sub-interfaces to access user networks. The data packets that CEs send to PEs carry double VLAN tags. Interworking is required between user networks.

Configuring a QinQ Termination Sub-interface and Connecting It to an L3VPN

A carrier's network provides the L3VPN service for users. PEs function as user access devices and connect to CEs through sub-interfaces to access user networks. The data packets that CEs send to PEs carry double VLAN tags. Interworking is required between user networks.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174108

Views: 55061

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next