No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009 CLI-based Configuration Guide - Ethernet Switching

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the LACP Mode

Setting the LACP Mode

Context

Link aggregation can work in manual load balancing mode or LACP mode depending on whether LACP is used.

In LACP mode, you must manually create an Eth-Trunk and add interfaces to the Eth-Trunk. However, LACP determines active interfaces through negotiation.

When an Eth-Trunk changes from manual load balancing mode to LACP mode, the Eth-Trunk can contain member interfaces. When an Eth-Trunk changes from LACP mode to manual load balancing mode, ensure that the Eth-Trunk has no member interface.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface eth-trunk trunk-id

    The Eth-Trunk interface view is displayed.

  3. Run mode lacp-static

    A working mode of the Eth-Trunk is configured.

    By default, an Eth-Trunk works in manual load balancing mode.

    Before configuring an Eth-Trunk, ensure that both ends use the same working mode. If the local end works in LACP mode, the remote end must use the LACP mode.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174108

Views: 55335

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next