No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR100-S, AR110-S, AR120-S, AR150-S, AR160-S, AR200-S, AR1200-S, AR2200-S, and AR3200-S V200R009 CLI-based Configuration Guide - Ethernet Switching

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the STP/RSTP Mode

Configuring the STP/RSTP Mode

Context

A switching device supports three working modes: STP, RSTP, and MSTP. Use the STP mode on a ring network running only STP, and use the RSTP mode on a ring network running only RSTP.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run stp mode { stp | rstp }

    The working mode of the switching device is set to STP or RSTP.

    By default, the working mode of a switching device is MSTP. MSTP is compatible with STP and RSTP.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174108

Views: 56759

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next